User's Manual

Document is the property of LDL-Technology and cannot be
reproduced or transmitted without written consent
WUS MOTO Mounting process mode
Ref : C 307 020 0010
Version : E2
10.2. STEP 2
Apply automatic screwdriver on the top housing till rise the introduction of the hexagonal 5mm
wrench into the nut and lock in rotation the case with the WUS Holder (PTFE part mounted onto
the screw driver). Just maintain the valve with hand by its nose.
C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS
22/ 24 Toulouse – France
Copyrights 2016
Push