User's Manual

Document is the property of LDL-Technology and cannot be
reproduced or transmitted without written consent
WUS MOTO Mounting process mode
Ref : C 307 020 0010
Version : E2
Disassembly of the second sidewall.
¨ Repeat the disassembly operations of the first sidewall until the tire is completely separated from
the rim.
¨ At any time the hand Tool or machine Tool must get in touch with the sensor.
C3070200010-E2-WUS Mounting process mode.odt LDL Technology SAS
17/ 24 Toulouse – France
Copyrights 2016
Slide the tool head
under the tire
With a tire iron, raise the second sidewall at 50° from the valve
Overview
Rear View
Step N°4
Step N°5
Step N°3
Then make the tire turn
to disengage the first sidewall