User manual

8
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
SETUP
Thanks to the multifunctional cabinet, the subwoofers of the Stinger G3 Series can be placed both horizontally and vertically. Non-slip rub-
ber rails provide stability in both cases. To prevent slippage when stacking the subwoofers, recesses are located on the top for the rubber
rails. An M20 threaded flange when using a speaker extension tube is located on the top side of the cabinet.
LDESUB15AG3: Protective Cover Item No.: LDESUB15G3PC
Castor Board Item No.: LDESUB15G3CB
LDESUB18AG3: Protective Cover Item No.: LDESUB18G3PC
Castor Board Item No.: LDESUB18G3CB
OPTIONAL ACCESSORIES
TECHNICAL SPECIFICATIONS
Model number: LDESUB15AG3 LDESUB18AG3
Product type: PA subwoofer PA subwoofer
Type: Active Active
Low/mid driver dimensions: 15“ 18“
Low/mid driver dimensions (mm): 381 mm 457.2 mm
Woofer magnet: Ferrite Ferrite
Woofer brand: Custom-made Custom-made
Woofer voice coil: 3“ 4“
Woofer voice coil (mm): 76.5 mm 101.6 mm
Amplifier: Class D Class D
RMS: 450 W 800 W
Peak power: 900 W 1600 W
Frequency response: 40 - Low-pass 35 - Low-pass
Max. SPL (peak): 133 dB 135 dB
Protection circuits: DC, over-current, short circuit, limiter DC, over-current, short circuit, limiter
Input impedance: 30 kOhm 30 kOhm
Input sensitivity: 0.3 V (RMS) 0.3 V (RMS)
Controls: Main level, mode Main level, mode
Indicators: On, signal, limit, protect, mode (80 Hz, 100 Hz,
120 Hz, cardioid)
On, signal, limit, protect, mode (80 Hz, 100 Hz,
120 Hz, cardioid)
Line inputs: 2 2
Line input connectors: 6.3 mm jack, XLR 6.3 mm jack, XLR
Line outputs: 2 2
Line output connectors: XLR XLR
Operating voltage: SMPS, 100-120 V AC / 200-240 V AC, 50-60 Hz
(automatic conversion)
SMPS, 100-120 V AC / 200-240 V AC, 50-60 Hz
(automatic conversion)