User manual

13
ITALIANO
POLSKI
ESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAIS
DEUTSCHENGLISH
13
SYSTEM SETTINGS AND OPERATIONS:
6
SWITCHED OUT
Use this Output to plug a further passive speaker.
When using this output the speaker of the Roadman
102 is automatically muted and the sound only
comes out of the passive speaker. (min 4 Ω)
7
UNSWITCHED OUT
Use this Output to plug a further passive speaker.
When using this output the sound comes out of both
the Roadman and the passive speaker. (min 8 Ω)
8
LINK OUTPUT
This output allows you to connect the Roadman to
another Roadman.
9
LINK SET
MASTER / SLAVE: When connecting several Road-
man together (from 2 to max. 7) the Master / Slave
Order hast to be respected. First Roadman of the
“Chain” should be set on Master, the following ones
should be set on Slave. The Roadman that is set on
Master takes the control over all other Roadman
(Volume control, switch ON/OFF etc.)
10
VOLUME
Control of Slave Speakers
11
RCA OUTPUT
Allows line level output for recording or any other
use
12
RCA INPUT
Allows the connection of any line level device
13
MASTER
General volume control of the system
14
TREBLE
TREBLE / HIGH TONE Equalizer
15
BASS
BASS / LOW TONE Equalizer
16
LINE
Line Input (12) volume controller
17
MIC 1
Microphone 1 (20) volume controller
18
MIC2
Microphone 2 (22) volume controller
19
TAPE
Tape volume controller
20
MIC/LINE
Microphone or Line Input 1. Accepts Jack or XLR
connectors.
21
SPEECH/MUSIC
SPEECH: Microphone Input Level
Music: Line Input Level
22
MIC/LINE
Microphone or Line Input 2. Accepts Jack or XLR
connectors.
23
SPEECH/MUSIC
SPEECH = MIC: Microphone Input Level
Music = LINE: Line Input Level
24
LINK INPUT
This Input allows you to connect a Roadman to
another Roadman. The Link Input of the Slave Road-
man should be connected to the Link Output of the
Master Roadman.
25
CHARGING / LOW BATT
LED Indicator: Low Battery power (red), battery
charging (green blinking), battery fully charged
(green).
26
LED INDICATOR
When red, the system is in operation. Turned ON.