Installation Guide

2 Specifi cations
1 Description
DESCRIPTION 4.5” ROUND 6” ROUND 4.75” SQUARE JAMB
LOGO 8310-856 8310-852 8310-853 8310-818
LOGO AND TEXT 8310-856T 8310-852T 8310-853T 8310-818T
SIZE 4.50” X 0.62” 6.00” X 0.62” 4.75” X 4.75” X 0.62” 1.50” X 4.75” X 0.62”
75.5320.00 20071221 Page 1 of 3
LCN introduces its new stainless steel pushplate line.
These pushplates are designed to fi t into standard
electrical gang boxes, and/or LCN’s line of plastic
enclosures. The faceplate is made of 1/16” thick stainless
steel for durability, and has concealed fasteners to
minimize vandalism. The pushplates may be hard wired
to the door operator or connected to LCN’s line of radio-
controlled transmitters. Part numbers are shown below.
3 Precautions

Shut off all power going to header before attempting any wiring procedures.

Maintain a clean & safe environment when working in public areas.

Constantly be aware of pedestrian traffi c around the door area.

Always stop pedestrian traffi c through the doorway when performing tests that may result in unexpected reactions by the
door.

ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge. Before handling any
board ensure you dissipate your body’s charge.

Always check placement of all wiring before powering up to insure that moving door parts will not catch any wires and
cause damage to equipment.

Ensure compliance with all applicable safety standards (i.e. ANSI A156.10/19) upon completion of installation.

DO NOT attempt any internal repair of the sensor. All repairs and/or component replacements must be performed by
LCN Inc. Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product will result in a voided product warranty.
4 Accessories
PLASTIC ENCLOSURES - Wide Range of Surface and Flush Mount Electrical Boxes.
RADIO CONTROLLED TRANSMITTERS & RECEIVERS - 433 MHz Digital Transmitters and Receivers.
BOLLARD - Steel Pushplate Mounting Post Available in Black, Bronze and Silver for use with 4 ½” Round & 4 ¾” Square Pushplates.
ESCUTCHEON - Stainless Steel Mounting Plate for 4.5“ & 6” Round Pushplates.
8310-818/-852/-853/-856
PUSHPLATES
STAINLESS STEEL ACTUATOR SWITCHES
USER’S GUIDE