Specification Sheet

HOW-TO-ORDER
4110 SERIES CLOSERS
1
. SELECT CYLINDER SIZE
4111 (adjustable from size 1 to 5)
4112
4113
4114
4
115 (DEL not available)
4116 (DEL, SHCUSH or HCUSH arm not available)
2. SPECIFY HAND
RH
L
H
3. SELECT FINISH
Standard Powder Coat __________
Aluminum, Dark Bronze , Tan, Statuary,
Light Bronze, Black, Brass.
Closer will be shipped with:
- STANDARD COVER,
- FIFTH SCREW SPACER
- EDA ARM,
- SELF-REAMING and TAPPING SCREWS,
unless options listed below are selected.
4110 CLOSER OPTIONS
CYLINDER
Delayed Action ((DEL), not available
with 4115 or 4116)
Advanced Variable Backcheck (AVB)
COVER
Lead Lined (LL)
Metal (MC)
FINISH
Custom Powder Coat (RAL) ___________
(handed metal cover required)
Plated Finish, US ______________
(handed metal cover required)
SRI primer
SPECIFY ARM
Hold-Open Extra Duty (HEDA)
Fusible Link,165° F (FL)
Cush-N-Stop (CUSH)
H-Cush-N-Stop (n/a with 4116 cylinder) (HCUSH)
Spring Cush (SCUSH)
Spring H-Cush (n/a with 4116 cylinder) (SHCUSH)
SCREW PACK
TB*, Self-Reaming & Tapping (TBSRT)
Wood & Machine Screw (WMS)
TB*, Wood & Machine Screw (TBWMS)
TORX Machine Screw (TORX)
TB* & TORX Machine Screw (TBTRX)
* Specify door thickness if other than 1 3/4”.
INSTALLATION ACCESSORIES
Plate, 4110-18
CUSH Shoe Support, 4110-30
Blade Stop Spacer, 4110-61
PA Shoe Adapter, 4110-418
CUSH Flush Panel Adapter, 4110-419
SPECIAL TEMPLATE
ST- _________
LCN 4110 SERIES
ORDERING INFORMATION
Indicates recommended range of door width for closer size
TABLE OF SIZES Select closer based on width of door.
T
he spring power of non-sized 4111 cylinder is adjustable from size 1 through
s
ize 5 and is shipped set to size 3.
Sized 4110 series cylinders available in size 2, 3, 4, 5, or 6.
Closing power of all 4110 Series closers can be increased 50%.
Specify next higher size closer where strong drafts exist.
Delayed action not available with 4115 or 4116 cylinder
H - CUSH and SPRING H-CUSH arm not available with 4116 cylinder
.
size 3 size 4 size 5 size 6
4113
*4111
EXTERIOR (and VESTIBULE) DOOR WIDTH
2
8"
711mm
30"
762mm
36"
914mm
42"
1
067mm
4114
INTERIOR DOOR WIDTH
48"
1219mm
28"
711mm
34"
864mm
38"
965mm
48"
1219mm
54"
1372mm
60"
1524mm
4115
4116
size 2 size 3 size 4 size 5 size 6
4113
*4111
4114
4115
4116
4112
* Adjustable Size 1 thru 5
* Adjustable Size 1 thru 5
DOOR WIDTH 36" 42" 48"
8.5* lbs. 4111 4111 4111
5.0* lbs. 4111 4111 4111
REDUCED OPENING FORCE 4110 CLOSERS
CAUTION ! Any manual door closer, including those certified by BHMA to
conform to ANSI Standard A156.4, that is selected, installed and adjusted
based on ADA or other reduced opening force requirements may not provide
sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on systems that meet
reduced opening force requirements without effecting closing power.
* Maximum opening force
63
Minimum
Door
Width
Minimum
Door
Width