Specification Sheet

PARALLEL ARM (PUSH SIDE)
MOUNTING
MAXIMUM OPENING
EDA or Fusible Link arm can be
templated for
100°,
A = 5 15/16” (151 mm)
B = 7 1/4” (184 mm)
140°,
A = 4 7/16” (113 mm)
B = 5 3/4” (146 mm)
or 180°.
A = 2 15/16” (75 mm)
B = 4 1/4” (108 mm)
Hold-open points up to maximum
opening with HEDA or Fusible Link arm.
CUSH arm can be templated for
maximum opening at
85°,
A = 8 5/16” (211 mm)
B = 9 5/8” (244 mm)
90°,
A = 7 11/16” (195 mm)
B = 9” (229 mm)
100°,
A = 6 7/16” (164 mm)
B = 7 3/4” (197 mm)
or 110°.
A = 5 9/16” (141 mm)
B = 6 7/8” (175 mm)
Hold-open point at maximum opening
with HCUSH arm.
Spring Cush hold-open points are
approximately 5˚ less than templated
stop point.
LCN 4110 SERIES
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended at hold-open point, where a door cannot swing
180°, or where CUSH-N-STOP arm is not used.
Clearance for EDA, or CUSH shoe is 5 1/2” (140 mm) from door face.
Top Rail less than 5 1/8” (130 mm) measured from stop requires PLATE, 4110-18.
Plate requires 2” (51 mm) minimum measured from the stop.
Stop Width minimum 1” (25 mm).
Head Frame flush or rabetted requires 4110-145 arm or PA SHOE ADAPTER,
4110-418, Use CUSH FLUSH PANEL ADAPTER, 4110-419 with CUSH arms.
Reveal less than 2 3/4” (70 mm), use CUSH SHOE SUPPORT, 4110-30 with CUSH
arms.
Blade Stop Spacer, 4110-61 required to clear 1/2” (13 mm) blade stop.
Cush Arm requires CUSH SHOE SUPPORT, 4110-30 for fifth screw anchorage with
CUSH arms.
Delayed Action Add suffix “DEL” to selected cylinder (eg. 4114 DEL). Not
available with 4115 or 4116 cylinder. Delays closing from maximum opening to
approximately 70°. Delay time adjustable up to approximately 1 minute.
Advanced Variable Backcheck cylinder starts backcheck at approximately 45°
instead of the normal 75°. Add suffix “AVB” to selected cylinder. When combined
with Delayed Action consult factory for special template.
MOUNTING DETAILS
Options
Sized or non-sized cylinder
.
Delayed Action and/or
Advanced Variable Backcheck
cylinder
.
HEDA, CUSH, HCUSH, SPRING
CUSH, SPRING HCUSH or
Fusible Link arm.
Metal or lead lined cover.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
60
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/07
*
*5 11/16” (144 mm) For Fusible Link Arm applications