Specification Sheet

ManualsBrandsLCN ManualsLCN Door Closer PartsLCN Adjustable Hold Open Arm for 4040XP Series Door Closers

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356

PHONE 877-671-7011

www.securitytechnologies.ingersollrand.com

Rev. 9/11

Standard 4040XP series closer shipped with regular arm, standard

plastic cover, and self reaming and tapping screws.

Non-sized cylinder is adjustable for interior doors to 5’0” and exterior

doors to 4’0”.

Closer mounts hinge side, top jamb, and parallel arm on either right or

left swinging doors.

Closers to meet ADA requirements.

Standard or optional custom powder coat finish.

Optional plated finish on cover, arm, and fasteners.

Optional SRI primer for installations in corrosive conditions.

UL and cUL listed for self-closing doors without hold-open.

Tested and certified under ANSI Standard A156.4, grade one.

The 4040 XPis LCN’s

most durable and flexible

heavy duty closer designed for

institutional and other demanding

high traffic applications.

Cast Iron

Forged Steel Arm

Double Heat Treated Steel Pinion

All Weather Fluid

Non-Handed

LCN Patented Green Dial

Fast & Accurate Installation Templates

UL & cUL Listed

3/4” Journal Diameter Pinion

Full Compliment Bearing

FEATURES

LCN 4040XP SERIES

PLASTIC

Summary of content (10 pages)

PAGE 1
The 4040 XP is LCN’s CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) most durable and flexible heavy duty closer designed for FEATURES LCN 4040XP SERIES institutional and other demanding high traffic applications.
PAGE 2
MOUNTING DETAILS LCN 4040XP SERIES HINGE (PULL) SIDE MOUNTING MAXIMUM OPENING Templating allows up to 120°. Hold-open points 90° up to 120° with hold-open arm. Butt Hinges should not exceed 5” (127 mm) in width. Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120°. Reveal should not exceed 3/4” (19 mm) for regular arm or hold-open arm. Options 4041 Delayed action cylinder*. Hold-open arm. Metal cover. Top Rail less than 3 3/4” (95 mm) requires PLATE, 4040XP-18.
PAGE 3
MOUNTING DETAILS LCN 4040XP SERIES TOP JAMB (PUSH SIDE) MOUNTING MAXIMUM OPENING Templating allows up to 120°. Hold-open points 85° up to 120° with hold-open arm. Butt Hinges should not exceed 5” (127 mm) in width. Auxiliary Stop is recommended at hold-open point or where the door cannot swing 120°. Reveal of 2 9/16” (65 mm) allows 120° opening for REGULAR ARM or standard HOLD-OPEN ARM.
PAGE 4
MOUNTING DETAILS LCN 4040XP SERIES PARALLEL ARM (PUSH SIDE) MOUNTING Optional mounting requires PA SHOE, 4040XP-62PA for REGULAR or HOLDOPEN arms. Add prefix "P" to closer description (eg. P4040XP). P4040XP closer includes 4040XP-201 FIFTH HOLE SPACER to support PA SHOE. MAXIMUM OPENING 180° opening/hold-open points with all except CUSH arms. 110° opening/hold-open with CUSH arms. Butt Hinges should not exceed 5” (127 mm) in width.
PAGE 5
MOUNTING DETAILS LCN 4040XP SERIES Mounting details are the same as 4040XP Series REGULAR or HOLD-OPEN except as listed below. 4040XP Series closers ordered with EDA or CUSH arms include 4040XP-201 FIFTH HOLE SPACER to support the shoe. 4040XP SERIES EDA MOUNT MAXIMUM OPENING EDA arm can be templated for points at: 110°, A = 6 3/8” (162 mm) B = 7 3/4” (197 mm) or 180°. A = 2 7/8” (73 mm) B = 4 1/4” (108 mm) Hold-open points up to maximum opening with HEDA arm.
PAGE 6
LCN 4040XP SERIES CYLINDER, 4040XP-3071 Heavy duty, non-handed cast iron cylinder assembly. ACCESSORIES CYLINDERS 4040XP-3071 COVERS COVER, 4040XP-72 Standard, non-handed plastic cover. METAL COVER, 4040XP-72MC Optional, handed cover. Required for plated finishes and custom powder coat finishes. 72 72LL 72MC ARMS REGULAR ARM, 4040XP-3077 Non-handed arm mounts pull side or top jamb with shallow reveal. P4041 closer includes PA SHOE, 4040XP-62PA required for parallel arm mounting.
PAGE 7
ACCESSORIES LCN 4040XP SERIES ARMS cont. 3077CNS CUSH-N-STOP® ARM, 4040XP-3077CNS Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe. HCUSH ARM, 4040XP-3049CNS Provides hold-open function with templated stop/hold-open points. Handle controls hold-open function.
PAGE 8
INSTALLATION ACCESSORIES cont. CUSH SHOE SUPPORT, 4040XP-30 provides anchorage for fifth screw used with CUSH arms, where reveal is less than 3 1/16” (78 mm). 30 61 BLADE STOP SPACER, 4040XP-61 required to lower parallel arm shoe to clear 1/2” (13 mm) blade stop. ACCESSORIES LCN 4040XP SERIES 419 PA FLUSH PANEL ADAPTER, 4040XP-419 provides horizontal mounting surface for parallel arm shoe on single rabetted or flush frame. AUXILIARY SHOE, 4040XP-62A requires a top rail of 7” (178 mm).
PAGE 9
TABLE OF SIZES 4040XP cylinders are adjustable from size 1 through size 6 and is shipped set to size 3. Closing power of 4040XP series closers may be adjusted 50%. Indicates recommended range of door width for closer size. EXTERIOR (and VESTIBULE) DOOR WIDTH 30" 762mm 24" 610mm size 3 size 5 1. SELECT FINISH. Standard Powder Coat __________ Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass.
PAGE 10
Notes 48 LCN CLOSERS 121 W. RAILROAD AVE. P.O. BOX 100 PRINCETON, IL, USA 61356 PHONE 877-671-7011 www.securitytechnologies.ingersollrand.com Rev.