Specification Sheet

ManualsBrandsLCN ManualsSurface Mount and Concealed Door ClosersLCN Stop and Side Mounted Door Closer with Electronic Release from the 4040 Series

LCN CLOSERS

121 W

. RAILROAD A

VE.

P.O. BOX 100

PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400

AX 800-248-1460

www.lcn.ingersollrand.com

9/07

Standard 4040SE series closer shipped with a standard arm, 24V or 120V

(please specify) SE track, standard cover, and wood and machine screw pack.

SEL tracks are optional, see 4040SE Series pages 20 & 21 for options.

Non-sized cylinders for interior doors to 4'0".

Hold-open force is adjustable.

Momentary on/off switch board assembly for testing door release also

provides over

-voltage protection. Field replaceable.

Functions as a full rack and pinion closer when hold-open is not

engaged or current is interrupted.

Closer mounts on either push or pull side of the door.

Non-handed for mounting on either right or left hand door

Concealed or surface wiring.

Interfaces with alarm systems. Consult factory for full details.

Standard or optional custom powder coated finishes on cover and arm.

Optional plated finishes.

The 4040SE SENTRONIC

is a

heavy duty, non-handed, non-

sized closer/holder designed to

provide single point hold-open

for fire and smoke barrier doors.

The door is held open until

current interruption releases the

holding mechanism and the door

closes. Single lever (track) arm

closer is specifically designed

for interior doors. Choice of

finishes, track functions, and

installation accessories meet

virtually all life safety

requirements.

The 4040SE and SEL Series is UL

listed for smoke barrier or labeled fire

doors. cUL listed for self-closing

doors without hold-open. Tested and

certified under ANSI Standard

A156.15. Conforms to life safety

code, NFPA 101.

FEATURES

LCN 4040SE SERIES

110°

95°

PLASTIC

METAL

HINGE (PULL) SIDE

TOP JAMB (PUSH)

STOP FACE (PUSH)

SWING FREE

DOUBLE EGRESS

CONCEALED (FRAME)

CONCEALED (DOO

MOUNTING

COVER CYLINDER

*ARM FUNCTION

FINISH

NON-SIZED

HANDED

SIZED

SINGLE POINT HOLD-OPEN

MULTI-POINT HO

LD-OPEN

BYPASS 80/140

POWDER COAT

PLATED

REGULAR (DOUBLE)

STANDARD (SINGLE)

Available

Not available

Maximum hold-open with standard template.

See individual closer series for degrees of

opening and hold-open per installation.

HINGE (PULL) SIDE MOUNTING

Summary of content (6 pages)

PAGE 1
The 4040SE SENTRONIC® is a heavy duty, non-handed, non- HINGE (PULL) SIDE MOUNTING sized closer/holder designed to FEATURES LCN 4040SE SERIES provide single point hold-open for fire and smoke barrier doors. The door is held open until current interruption releases the holding mechanism and the door closes. Single lever (track) arm closer is specifically designed for interior doors. Choice of finishes, track functions, and installation accessories meet requirements.
PAGE 2
MOUNTING DETAILS LCN 4040SE SERIES HINGE (PULL) SIDE MOUNTING Information applies to 4040 SE unless otherwise specified. MAXIMUM OPENING Templating allows 110°. Hold-open points between 85° and 110° in approximately 3° increments. Pull side mounting on a double egress frame requires a handed double egress arm. Maximum hold-open to 95°. 2 11/16” (67 mm) maximum reveal on pull side. SEL track provides hold-open points between 90° and 120°‚ in approximately 3° increments.
PAGE 3
LCN 4040SE SERIES STOP FACE (PUSH SIDE) MOUNTING Information applies to 4040 SE closers unless otherwise specified. MAXIMUM OPENING Templating allows 110°. Hold-open points between 85° and 110° in approximately 3° increments. SEL track provides hold-open points between 90° and 120°‚ in approximately 3° increments. SE, SEL ELECTRICAL OPTIONS These track assemblies require a single power circuit for the holding solenoid. SE or SEL holding solenoid is either 24V or 120V input, please specify.
PAGE 4
ACCESSORIES LCN 4040SE SERIES CYLINDER CYLINDER, 4040SE-3071 Standard, non-handed cast iron cylinder assembly. COVERS 3071 COVER, 4040SE-72 Standard, non-handed plastic cover. LEAD LINED COVER, 4040SE-72LL Optional, non-handed cover. 72 72LL METAL COVER, 4040SE-72MC Optional, handed cover. Required for plated finishes and custom powder coat finishes. 2210dps-3071 72MC ARMS STANDARD ARM, 4040SE-3077T Non-handed arm, adjustable to select hold-open point.
PAGE 5
SWITCH TEST SWITCH, 4040SE-3436 3436 INSTALLATION ACCESSORIES PLATE, 4040SE-18 Required where top rail is less than 3 1/2" (89 mm). Plate requires minimum 2" (51 mm) top rail. Plate installations require a SPECIAL TEMPLATE. ACCESSORIES LCN 4040SE SERIES 18 PLATE, 4040SE-18PA Required where top rail is less than 5 3/4" (146 mm). Plate requires minimum 2" (51 mm) top rail. Plate installations require a SPECIAL TEMPLATE.
PAGE 6
ORDERING INFORMATION LCN 4040SE SERIES TABLE OF SIZES 4040SE series cylinders accommodate interior doors up to 48" (1219 mm) wide. Closing power of 4040SE Series closers is adjustable through a range of sizes up to size 4. Minimum door widths: for SE on paired door, min. width 60” (1524 mm). for SE, minimum door width 28" (711 mm). for SEL, minimum door width 30" (762 mm). Details are listed on the MOUNTING DETAILS pages. HOW-TO-ORDER 4040SE SERIES CLOSERS 1. SELECT TRACK n SE n SEL 2.