Specification Sheet

ManualsBrandsLCN ManualsLCN Door Closer PartsLCN Cush Shoe Support Bracket from the 4040 Series

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400

FAX 800-248-1460

www.lcn.ingersollrand.com

3/07

Standard 4040 series closer shipped with regular arm, standard plastic

cover, and self reaming and tapping screws. See 4040 Series pages

45-47 for options.

Non-sized cylinder is adjustable for interior doors to 5’0” and exterior

doors to 4’0”.

Closer mounts hinge side, top jamb, and parallel arm w/PA Shoe on

either right or left swinging doors.

Closers to meet ADA requirements. See 4040 Series page 48.

Standard or optional custom powder coat finish.

Optional plated finish on cover, arm, and fasteners.

Optional SRI primer for installations in corrosive conditions.

Optional designer series metal cover

UL and cUL listed for self-closing doors without hold-open.

ested and certified under ANSI Standard A156.4, grade one.

The 4040 SUPER SMOOTHEE® is

LCN’s most flexible heavy duty

closer designed for institutional

and other rugged high traffic

applications.

Ten Million Cycles

Cast Iron

Forged Steel Arm

Double Heat Treated Steel

Pinion

All Weather Fluid

Non-Handed

LCN

® Fast™ Power Adjust

Fast & Accurate Installation

UL & cUL Listed

FEATURES

LCN 4040 SERIES

DESIGNER METAL

PLASTIC

METAL

HINGE (PULL) SIDE

TOP JAMB (PULL)

TOP JAMB (PUSH)

PAR

ALLEL ARM

STOP FACE

MOUNTING

COVER

120° 120°

180°

110°

STANDARD (

SINGLE)

REGULAR (DOUBL

HOLD-OPEN

FUSIBLE LINK

EDA/HEDA

CUSH/HCUSH

SCUSH/SHCU

**ARM FUNCTION

FINISH

CYLINDER

NON-HANDED

NON-SIZED

ACCESSIBILITY

DELAYED A

CTION

AVB

***

POWDER COAT

PLATED

Available

Not available

Closer available with less than 5.0 lbs. opening force on 36" door.

**Maximum opening/hold-open point with standard template.

*** Advanced Variable Backcheck

CLOSER MOUNTS

*HINGE (PULL) SIDE

TOP JAMB (PUSH SIDE)

PARALLEL ARM (PUSH SIDE)

*HINGE (pull) side mount shown

The 4040 Series includes the

LCN® FAST™ Power Adjust,

a revolutionary visual indicator

for Spring Power Adjustment.

For

See

Summary of content (11 pages)

PAGE 1
The 4040 SUPER SMOOTHEE® is CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) LCN’s most flexible heavy duty closer designed for institutional FEATURES LCN 4040 SERIES and other rugged high traffic applications. Ten Million Cycles Cast Iron Forged Steel Arm Double Heat Treated Steel Pinion P rX 0 Fo e P.
PAGE 2
FEATURES LCN 4040 SERIES New 4040XP The new 4040XP is LCN’s most durable heavy duty closer designed for the most demanding, high use and abuse applications.
PAGE 3
MOUNTING DETAILS LCN 4040 SERIES HINGE (PULL) SIDE MOUNTING MAXIMUM OPENING Templating allows up to 120°. Hold-open points 90° up to 120° with hold-open arm. Optional, Non-handed Designer Series Metal Cover Butt Hinges should not exceed 5” (127 mm) in width. Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120°. Reveal should not exceed 3/4” (19 mm) for regular arm or hold-open arm. Options 4040XP cylinder 4041 Delayed action cylinder. Hold-open arm.
PAGE 4
MOUNTING DETAILS LCN 4040 SERIES TOP JAMB (PUSH SIDE) MOUNTING MAXIMUM OPENING Templating allows up to 120°. Hold-open points 85° up to 120° with hold-open arm. Optional, Non-handed Designer Series Metal Cover Butt Hinges should not exceed 5” (127 mm) in width. Auxiliary Stop is recommended at hold-open point or where the door cannot swing 120°. Reveal of 2 9/16” (65 mm) allows 120° opening for REGULAR ARM or standard HOLD-OPEN ARM.
PAGE 5
MOUNTING DETAILS LCN 4040 SERIES PARALLEL ARM (PUSH SIDE) MOUNTING Optional mounting requires PA SHOE, 4040-62PA for REGULAR or HOLDOPEN arms. Add prefix "P" to closer description (eg. P4041). P4041 closer includes 4040-201 FIFTH HOLE SPACER to support PA SHOE. MAXIMUM OPENING 180° opening/hold-open points with all except CUSH arms. 110° opening/hold-open with CUSH arms. Optional, Non-handed Designer Series Metal Cover Butt Hinges should not exceed 5” (127 mm) in width.
PAGE 6
MOUNTING DETAILS LCN 4040 SERIES Mounting details are the same as 4040 Series REGULAR or HOLDOPEN except as listed below. 4040 Series closers ordered with EDA or CUSH arms include 4040201 FIFTH HOLE SPACER to support the shoe. 4040 SERIES EDA MOUNT MAXIMUM OPENING EDA arm can be templated for points at: 110°, A = 6 3/8” (162 mm) B = 7 3/4” (197 mm) or 180°. A = 2 7/8” (73 mm) B = 4 1/4” (108 mm) Hold-open points up to maximum opening with HEDA arm.
PAGE 7
CYLINDERS 3071XP CYLINDER, 4041-3071 Standard, non-handed cast iron cylinder assembly. CYLINDER, 4040XP-3071 Heavy duty, non-handed cast iron cylinder assembly. 3071 COVERS COVER, 4040-72 Standard, non-handed plastic cover. METAL COVER, 4040-72MC Optional, handed cover. Required for plated finishes and custom powder coat finishes. LEAD LINED COVER, 4040-72LL Optional non-handed plastic cover. DESIGNER SERIES METAL COVER, 4040-72DS1 Optional, non-handed designer series metal cover.
PAGE 8
ACCESSORIES LCN 4040 SERIES ARMS cont. 3077CNS CUSH-N-STOP® ARM, 4040-3077CNS Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe. HCUSH ARM, 4040-3049CNS Provides hold-open function with templated stop/hold-open points. Handle controls hold-open function. 3049CNS SPRING CUSH ARM, 4040-3077SCNS Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe.
PAGE 9
LCN 4040 SERIES ACCESSORIES INSTALLATION ACCESSORIES cont. CORNER BRACKET, 4040-17 Designed to lower closer for clearance of certain auxiliary holders (consult factory). 4040-17 4040-16 CORNER BRACKET, 4040-16 For doors where top jamb or parallel arm mounting cannot be used (consult factory). 30 CUSH SHOE SUPPORT, 4040-30 provides anchorage for fifth screw used with CUSH arms, where reveal is less than 3 1/16” (78 mm).
PAGE 10
ORDERING INFORMATION LCN 4040 SERIES TABLE OF SIZES 4041 cylinders are adjustable from size 1 through size 6 and is shipped set to size 3. Closing power of 4040 series closers may be adjusted 50%. Indicates recommended range of door width for closer size. 30" 762mm size 3 36" 42" 48" 914mm 1067mm1219mm size 4 size 5 1. SELECT FINISH. Standard Powder Coat __________ Aluminum, Dark Bronze , Tan, Statuary, Light Bronze, Black, Brass.
PAGE 11
TABLE OF SIZES 4040XP cylinders are adjustable from size 1 through size 6 and is shipped set to size 3. Closing power of 4040 series closers may be adjusted 50%. Indicates recommended range of door width for closer size. 30" 762mm size 3 36" 42" 48" 914mm 1067mm1219mm size 4 size 5 1. SELECT FINISH. Standard Powder Coat __________ Aluminum, Dark Bronze , Tan, Statuary, Light Bronze, Black, Brass.