Specification Sheet

1520 track
1
520t-72
1520-72
1460t-72ec
1070-72
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/07
LCN 4030 SERIES
72MC
30
62A
ACCESSORIES
31
65
COVERS
COVER, 4030-72MC
Non-handed metal cover.
INSTALLATION ACCESSORIES
PLATE, 4030-18TJ
Required for top jamb mounting where head frame is less than
2 1/4” (57 mm) or flush ceiling condition exists. Plate requires 1 1/2”
(38 mm) minimum.
PLATE, 4030-18PA
Required for parallel arm mounting where top rail is less than 5”
(127 mm), measured from the stop.
Plate requires 1 3/4” (44 mm) minimum.
CUSH SHOE SUPPORT, 4030-30
Provide anchorage for fifth screw used with CUSH arms where
reveal is less than 3 1/16” (78 mm).
BLADE STOP SPACER, 4030-61
Lowers parallel arm shoe to clear 1/2” (13 mm) blade stop.
AUXILIARY SHOE, 4030-62A requires a top rail of 7” (178 mm).
Optional shoe replaces -62P
A for parallel arm mounting of regular
arm with some overhead holder/stop. Consult factory.
SOFFIT SHOE, 4030-65
Adapts hinge side shoe to rounded or bull nose trim.
P
A SHOE ADAPTER, 4030-418
Provides horizontal mounting surface for parallel arm shoe on single
rabetted or flush frame.
CUSH FLUSH PANEL ADAPTER, 4030-419
Provides horizontal mounting surface for CUSH shoe on single
rabetted or flush frame.
418
419
18TJ
18PA
61