Specification Sheet

PARALLEL ARM (PUSH SIDE) MOUNTING
REGULAR or HOLD-OPEN arm mounting requires PA
SHOE, 4030-62PA for REGULAR or HOLD-OPEN
arms. Add prefix "P" to closer description (eg.
P4031). P4031 closer includes 4030-201 FIFTH HOLE
SPACER to support PA SHOE.
MAXIMUM OPENING
REGULAR or HOLD-OPEN arms can be templated for
180°.
EDA template allows 110° maximum opening.
Hold-open points up to maximum opening with
hold-open arm.
LCN 4030 SERIES
MOUNTING DETAILS
Butt Hinges should not exceed 5” (127 mm) in
width.
Auxiliary Stop is recommended at hold-open point
or where a door cannot swing maximum opening.
Clearance for 4030-62PA shoe is
4” (102 mm) from door face. EDA arm is
5 1/2” (140 mm) from door face.
Top Rail less than 5“ (127 mm) measured from the
stop requires PLATE, 4030-18PA. Plate requires
1 3/4” (44 mm) minimum.
Stop Width minimum 1” (25 mm).
Head Frame flush or single rabetted requires PA
SHOE ADAPTER, 4030-418.
BLADE
STOP
clearance, requires 1/2” (13 mm)
BLADE STOP SPACER, 4030-61.
Auxiliary Shoe 4030-62A allows installation of
regular arm with overhead holder/stop. Special
templating required.
EDA
ARM
requires SHOE
SUPPORT
, 4030-30 for
fifth screw anchorage where reveal is less than
3 1/16” (78 mm).
Options
Hold-open, EDA, HEDA,
CUSH, HCUSH, SPRING
CUSH, or SPRING HCUSH arm.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
28
4030 EDA MOUNT
4030 PARALLEL ARM MOUNT
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/07
4030 closers ordered with EDA arms include 4030-201
FIFTH HOLE SPACER to support the shoe.