Specification Sheet

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
3/07
LCN 4030 SERIES
MOUNTING DETAILS
TOP JAMB (PUSH SIDE)
MOUNTING
MAXIMUM OPENING
Can be templated for
180°.
Hold-open points up to maximum
opening with hold-open arm.
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended at hold-open point or where the door
cannot swing 180
°.
Reveal up to 3 1/2” (89 mm) allows 180
° opening. Reveal up to
7 1/2” (191 mm) with long arm allows for 140° opening.
Top Rail requires 1 1/2" (38 mm) minimum from stop.
Head Frame less than 2 1/4” (57 mm) requires PLATE, 4030-18TJ.
Plate requires 1 1/2” (38 mm) minimum.
Options
Hold-open arm.
Long arm.
Long Hold-open arm.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
27