Specification Sheet

ManualsBrandsLCN ManualsSurface Mount and Concealed Door ClosersLCN Single Lever Arm Concealed Door Closer from the 2030 Collection for 1.75 Inch Thick Door

Standard 2030 series closer shipped with standard arm, standard track,

mounting/finish plate, and wood and machine screw pack. See 2030

Series page 13 & 14 for options.

Sized cylinders for interior doors to 4’6” and exterior doors to 3’6”.

Handed for right or left swinging doors.

Aluminum frame requires minimum 1 3/4” (44 mm) x 4” (102 mm) tube.

Closers to meet ADA requirements. See 2030 Series page 15.

Standard or optional custom powder coat finish.

Optional plated finish on arm, fasteners and finish plate.

The concealed 2030 Series

PACER

is a heavy duty closer

designed to fit in a narrow,

minimum 1 3/4” aluminum

transom. The single lever arm

and roller assembly provide

smooth, quiet door control and

the choice of finishes and track

functions meet virtually all

architectural requirements.

The 2030 Series is UL & cUL listed for

self-closing doors, without hold-open.

Tested and certified under ANSI

Standard A156.4, grade 1.

FEATURES

LCN 2030 SERIES

POWDER COAT

PLATED

CONCEALED

MOUNTING

FINISH

CONCEALED

EXPOSED

ARM

ACCESSIBILI

CYLINDER *ARM FUNCTION

DELAY

ACTION

REGULAR

(DOUBLE)

STANDA

RD (SINGLE)

HANDED

SIZED

110°

HOLD-OPEN

180°

IN FRAME

IN 1 3/4" TUBE

IN DOOR

Available

Not available

Closer available with less than 5.0 lbs. opening force on 36" door.

*Maximum opening/hold-open point with standard template. See individual closer series

for degrees of opening per installation.

CONCEALED (IN 1 3/4” TUBE) MOUNTING

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400

FAX 800-248-1460

www.lcn.ingersollrand.com

9/07

Summary of content (5 pages)

PAGE 1
The concealed 2030 Series ® PACER is a heavy duty closer CONCEALED (IN 1 3/4” TUBE) MOUNTING designed to fit in a narrow, FEATURES LCN 2030 SERIES minimum 1 3/4” aluminum transom. The single lever arm and roller assembly provide smooth, quiet door control and the choice of finishes and track functions meet virtually all architectural requirements. The 2030 Series is UL & cUL listed for self-closing doors, without hold-open. Tested and certified under ANSI Standard A156.4, grade 1.
PAGE 2
MOUNTING DETAILS LCN 2030 SERIES CONCEALED MOUNTING For interior or exterior doors. Single acting cylinder in head frame. Concealed arm and track in door top rail. MAXIMUM OPENING Butt hinge template allows 180°, trim permitting. Limited to 110° when optional bumper is installed. Adjustable hold-open points from 85° to 110°, with hold-open track. Consult factory if door will be held open at 180° Offset pivot template allows 115°, trim permitting. Limited to 95° when optional bumper is installed.
PAGE 3
CYLINDERS 3071 CYLINDER, 2030-3071 Standard, handed, cast iron cylinder assembly with mounting plate. For various applications see “Table of Sizes” on 2030 Series page 15 ACCESSORIES LCN 2030 SERIES . ARM STANDARD ARM, 2030-3077T Handed arm. Track roller not included with arm. 3077T TRACKS STANDARD TRACK, 2030-3038 Standard, non hold-open, non-handed track. Will accept hold-open clip and/or bumper assembly.
PAGE 4
ACCESSORIES LCN 2030 SERIES INSTALLATION ACCESSORIES FIRE SHIELD, 2030-420 22 gauge steel liner mounts in the track mortise of the door’s top rail for 20 minute labeled wood doors. 420 WOOD MOUNTING CLIP SET, 2030-416 Simplifies mounting center pivoted 2030 closer in wood frame. Includes latch stile clip, hinge stile clip, and cover. For use with Ives Series center pivots. Consult factory for special template.
PAGE 5
HOW-TO-ORDER 2030 SERIES CLOSERS TABLE OF SIZES Select closer based on width of door. 2030 Series cylinders available in size 1, 2, 3, 4, or 5. Closing power of all 2030 Series closers may be increased 35%. Specify next higher size closer where strong drafts exist. Indicates recommended range of door width for closer size.