Specification Sheet

2013
LCN 2010 SERIES
ORDERING INFORMATION
Indicates recommended range of door width for closer size.
DOOR WIDTH
36"
42" 48"
8.5* lbs. 2014 2014 2015
5.0* lbs.
2011
2011 2013
REDUCED OPENING FORCE 2010 CLOSERS
CAUTION ! Any manual door closer, including those certified by BHMA to
conform to ANSI Standard A156.4, that is selected, installed and adjusted
based on ADA or other reduced opening force requirements may not provide
sufficient power to reliably close and latch a door.
Refer to POWER OPERATORS section for information on systems that meet
reduced opening force requirements without affecting closing power.
TABLE OF SIZES Select closer based on width of door.
2010 Series cylinders available in size 1, 3, 4, 5, or 6.
Closing power of all 2010 Series closers may be increased 15%.
S
pecify next higher size closer where strong drafts exist.
* Maximum opening force
size 3 size 4 size 5 size 6
2014
2013
EXTERIOR (and VESTIBULE) DOOR WIDTH
28"
711mm
30"
762mm
36"
914mm
42"
1067mm
2015
INTERIOR DOOR WIDTH
48"
1219mm
2016
HOW-TO-ORDER
2010 SERIES CLOSERS
1. SELECT CYLINDER SIZE
2011 (ADA)
2013
2
014
2015
2
016
2. SPECIFY HAND
RH
LH
3. SPECIFY FINISH
Standard Powder Coat __________
Aluminum, Dark Bronze , Tan, Statuary,
Light Bronze, Black, Brass.
Closer will be shipped with:
- FINISH PLATE,
- TRACK ARM,
- TRACK ROLLER,
- STANDARD TRACK,
- WOOD and MACHINE SCREW PACK,
unless options listed below are selected.
CLOSER OPTIONS
TRACK
Standard with Bumper (BUMPER)
Hold-open (H)
Hold-open with Bumper (HBUMPER)
FINISHES
Custom Powder Coat (RAL)_____________
Plated Finish, US ______________
SRI primer
SCREW PACK
TORX Machine Screw (TORX)
INSTALLATION ACCESSORIES
Fire Shield, 2010-420
SPECIAL TEMPLATE
ST- _________
size 3 size 4 size 5 size 6
2014
28"
711mm
38"
965mm
48"
1219mm
2015
54"
1372mm
2016
60"
1524mm
34"
864mm
10
Minimum
Door Width
Minimum
Door Width
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
9/07