Specification Sheet

LCN 2010 SERIES
CYLINDERS
CYLINDER, 2010-3071
Standard, handed, cast iron cylinder assembly with mounting
plate. For various applications see “Table of Sizes” on 2010
Series page 10.
ARM
STANDARD ARM, 2010-3077T
Handed arm.
Track roller not included with arm.
TRACKS
STANDARD TRACK, 2010-3038
Standard, non hold-open, non-handed track.
Will accept hold-open clip and/or bumper assembly.
STANDARD TRACK with BUMPER, 2010-3038B
Optional, non hold-open, non-handed track with bumper.
Will accept hold-open clip.
HOLD-OPEN TRACK, 2010-3038H
Optional, non-handed hold-open track.
Will accept bumper assembly.
HOLD-OPEN TRACK with BUMPER, 2010-3038HB
Optional, non-handed hold-open track with bumper
.
INSTALLATION ACCESSORIES
FIRE SHIELD, 2010-420
22 gauge steel liner mounts in the track mortise of the door’s
top rail for 20 minute labeled wood doors.
TRACK BUMPER, 2010-169
Mounts in track to assist backcheck. Limits maximum opening.
Consists of bumper, bumper post, and mounting screw.
NOTE: T
rack bumper does not replace auxiliary stop.
HOLD-OPEN CLIP, 2010-3054
Mounts in track to provide hold-open function.
Hold-open point controlled by clip location.
TRACK ROLLER, 2010-3034
Quiet, low friction roller assembly.
Shoulder dimension "X" = 1/16" (2mm).
3077T
3
071
420
3038
ACCESSORIES
3034
169
3054
3038H
3038HB
9
3038B
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
9/07