Specification Sheet

CONCEALED MOUNTING
For interior or exterior doors.
Single acting cylinder in head frame.
Concealed arm and track in door
top rail.
MAXIMUM OPENING
Butt hinge template allows 180°,
trim permitting.
Limited to 110° when optional
bumper is installed.
Adjustable hold-open points from
85° to 110°, with hold-open track.
Consult factory if door will be held
open at 180°
Offset pivot template allows 110°,
trim permitting.
Limited to 95° when optional
bumper is installed.
Adjustable hold-open points from
75° to 95°, with hold-open track.
Center pivot template allows 120°,
trim permitting.
Limited to 95° when optional
bumper is installed.
Adjustable hold-open points from
75° to 95°, with hold-open track.
LCN 2010 SERIES
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended where a door cannot swing 180
°.
Optional track bumper assembly assists backcheck in cushioning the
opening swing of the door. It is not intended to replace an auxiliary stop.
T
op Rail
1 3/8” (35 mm) mortise required.
With Fire Shield, 1 13/32” (36 mm) mortise required.
5/16” (8 mm) cutout required at top of the door, stop face only.
Door Thickness 1 3/4” (44 mm) minimum.
Hollow Metal Frame Consult factory for installation instructions.
MOUNTING DETAILS
Options
Standard track with Bumper
Hold-open track
Hold-open track with Bumper
Fire Shield
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
8
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
9/07