Specification Sheet

ManualsBrandsLCN ManualsSurface Mount and Concealed Door ClosersLCN Surface Mount Track Door Closer from the 1460T Series for Interior Doors up to 34 Inches

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400

FAX 800-248-1460

www.lcn.ingersollrand.com

9/07

Standard 1460T series closer shipped with a standard arm, a slim line

plastic cover, a standard track, a track roller, and self reaming and

tapping screws. See 1460T Series page 23 & 24 for options.

Multiple cover options include; Standard (Slim line), Smooth Slim line

(EC), Full and Designer Series.

Non-sized (2-4) cylinders adjustable for interior doors to 4’0”.

Non-handed closer mounts hinge side, top jamb (pull side), and stop face

on either right or left swinging doors.

1461T meets ADA requirements. See 1460T Series page 25.

Standard or optional custom powder coat finish.

Optional plated finish on Designer Series metal cover, arm and fasteners.

Optional SRI primer for installations in corrosive conditions.

The 1460T is a fully universal slim

line, single lever (track) arm

closer designed for interior use

on narrow headframes and top

rails. The modern styling and

small projection make it an

excellent choice for interior

doors.

The 1460T Series is UL and cUL listed

for self-closing doors without

hold-open. Tested and certified under

ANSI Standard A156.4, grade one.

FEATURES

LCN 1460T SERIES

PLASTIC

METAL

COVER

DESIGNER SERIES

*ARM FUNCTION

HEAVY DUTY

HOLD-OPEN

STANDARD (SINGLE)

REGULAR (DOUBLE)

EDA/HED

CUSH/HCUSH

SCUSH/S

HCUSH

NON-HANDED

NON-SIZED

ACCESSIBILITY

CYLINDER

DELAY

ACTION

POWDER COAT

PLATED

FINISH

180°

115°

PARALLEL ARM

MOUNTING

STOP FACE

HINGE (PULL) SIDE

TOP JAMB (PULL)

TOP JAMB (PUSH)

Available

Not available

Closer available with less than 5.0 lbs. opening force on 36" door.

* Maximum opening/hold-open point with standard template. Hinge side mount.

D = For Designer series only.

CLOSER MOUNTS

*HINGE (PULL) SIDE

TOP JAMB (PULL SIDE)

STOP FACE (PUSH SIDE)

*HINGE (pull) side mount shown

Summary of content (7 pages)

PAGE 1
The 1460T is a fully universal slim CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PULL SIDE) STOP FACE (PUSH SIDE) line, single lever (track) arm closer designed for interior use on narrow headframes and top rails. The modern styling and small projection make it an excellent choice for interior doors. The 1460T Series is UL and cUL listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4, grade one.
PAGE 2
MOUNTING DETAILS LCN 1460T SERIES HINGE (PULL) SIDE MOUNTING MAXIMUM OPENING Templating allows up to 180°, trim and frame permitting, limited to 115° when optional bumper is installed. Consult factory if door will be held open at 180° Hold-open points at 85°, 90°, 95°, 100° ,110° or 115° with hold-open tracks. Optional, Non-handed Designer Series Metal Cover Butt Hinges should not exceed 5” (127 mm) in width. Auxiliary Stop is recommended where a door cannot swing 180°.
PAGE 3
TOP JAMB (PULL SIDE) MOUNTING MAXIMUM OPENING Templating allows up to 180°, limited to 115° when optional bumper is installed. Consult factory if door will be held open at 180° Hold-open points at 85°, 90°, 95°, 100°, 110° or 115° with hold-open tracks. Optional, Non-handed Designer Series Metal Cover Butt Hinges should not exceed 5” (127 mm) in width. Auxiliary Stop is recommended where a door cannot swing 180°. Track bumper assembly assists backcheck in cushioning the opening swing of the door.
PAGE 4
MOUNTING DETAILS LCN 1460T SERIES STOP FACE (PUSH SIDE) MOUNTING MAXIMUM OPENING Templating allows 110°, limited to 100° when optional bumper is installed. Hold-open points at 85°, 90°, 95°, or 100° with hold-open tracks. Optional, Non-handed Designer Series Metal Cover 1460T - 18PA Butt Hinges should not exceed 5” (127 mm) in width. Auxiliary Stop is recommended where a door cannot swing 110°. Track bumper assembly assists backcheck in cushioning the opening swing of the door.
PAGE 5
ACCESSORIES LCN 1460T SERIES CYLINDERS CYLINDER, 1460T-3071 Standard, non-handed cast iron cylinder assembly. For various applications see “Table of Sizes” on 1460T Series page 25. COVERS COVER, 1460T-72 Standard, non-handed, slim line plastic cover with feature strip. 3071 72 72LL LEAD LINED COVER, 1460T-72LL Optional non-handed cover. FULL COVER, 1460T-72FC Optional, non-handed, plastic cover provides complete enclosure.
PAGE 6
ACCESSORIES LCN 1460T SERIES INSTALLATION ACCESSORIES PLATE, 1460T-18,1460T-18DS1,1460T-18FC Required for hinge side mount where top rail is less than 2 1/2” (64 mm). Required for top jamb mount when head frame is less than 2 3/4” (70 mm). Plate requires minimum 1 1/2” (38 mm) top rail or 1 3/4” (44 mm) head frame minimum. With Full cover, use PLATE, 1460T-18FC. With Designer Series metal cover, use PLATE, 1460T-18DS1.
PAGE 7
TABLE OF SIZES Select closer based on width of door. The spring power of a 1460T cylinder is adjustable from size 2 to size 4 and is shipped adjusted to size 3. The closing power of 1460T series cylinders may be increased 50%. The spring power of a 1461T cylinder is adjustable from size 1 to size 2 and is shipped adjusted to size 1. Indicates recommended range of door width for closer size. INTERIOR DOOR WIDTH 34" 864mm 26" 660mm size 2 38" 965mm size 3 48" 1219mm 1.