Specification Sheet

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcnclosers.com
3/04
LCN 1460 SERIES
MOUNTING DETAILS
TOP JAMB (PUSH SIDE)
MOUNTING
MAXIMUM OPENING
110°
A = 6 3/4” (169 mm)
B = 11 1/4” (286 mm)
180°
A = 3” (76 mm)
B = 7 1/2” (191 mm)
Hold-open points up to maximum
opening with hold-open arm.
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended at hold-open point or where a door
cannot swing 180°.
Reveal of 2 1/2” (64 mm) allows 180° opening with REGULAR HOLD-OPEN
ARM. 3 1/2” (89 mm) allows up to 180° opening with REGULAR ARM or
180° with optional LONG HOLD-OPEN ARM when standard head and tube
is replaced with optional LONG HEAD AND TUBE, 1460-78HL . 4 7/8” (124
mm) allows up to 140° with REGULAR ARM or LONG HOLD-OPEN ARM.
7” (178 mm) allows up to 140° opening with LONG ARM when standard
rod and shoe is replaced with optional LONG ROD AND SHOE, 1460-79LR.
Top Rail requires 1 7/8" (48 mm) minimum.
2 3/4" (70 mm) minimum with closer on PLATE, 1460-18.
Head Frame less than 1 3/4” (44 mm) requires PLATE, 1460-18.
For flush ceiling condition with 2” (51 mm) headframe, use PLATE,
1460-18. With Full cover, use PLATE, 1460-18FC.
Plate requires 1 1/4” (32 mm) minimum. With Designer Series
metal cover, use PLATE, 1460-18DS1.
Delayed Action Add suffix “DEL” to selected cylinder (eg. 1460 DEL).
Delays closing from 110° to 75° or 180° to 95° depending on templating.
Delay time adjustable up to approximately 1 minute
.
Options
Delayed action cylinder.
Long arm, hold-open arm,
long hold-open arm.
Full cover (FC).
Smooth Slim line cover (EC).
Designer Series metal cover (DS1).
Special Templates
Customized installation templates or
products may be available to solve
unusual applications.
Contact LCN for assistance.
17
1460 - 18
Optional, Non-handed
Designer Series
Metal Cover