Specification Sheet

Options
Delayed action cylinder.
Hold-open, EDA, HEDA,
CUSH, HCUSH arm, SPRING
CUSH, SHCUSH arms.
Slim Line cover
. (C)
Special Templates
Customized installation templates or
products may be available to solve
unusual applications.
Contact LCN for assistance.
LCN 1260 SERIES
MOUNTING DETAILS
PARALLEL ARM (PUSH SIDE)
MOUNTING
Optional mounting requires PA SHOE,
1260-62PA for REGULAR or HOLD-
OPEN arms. Add prefix "P" to closer
description (e.g. P1260). P1260 closer
includes 1260-201 FIFTH HOLE
SPACER to support PA SHOE.
MAXIMUM OPENING
Regular or hold-open arm can be
templated
to 100°
A = 7 3/16” (183 mm)
B = 8 5/8” (219 mm)
or 101° to 130°
A = 5 11/16” (144 mm)
B = 7 1/8” (181 mm)
or *131° to 180
°
A = 3 11/16” (94 mm)
B = 5 1/8” (130 mm)
Hold-open points up to maximum
opening with hold-open arm.
*Frame and trim permitting.
1260 REGULAR or HOLD-OPEN MOUNT
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended at hold-open point, where a door
cannot swing 180°, or where CUSH-N-STOP arm is not used.
Clearance for 1260-62P
A shoe is 4” (102 mm) from door face.
Top Rail less than 4 3/8” (111 mm) measured from the stop requires
PLATE, 1260-18PA.
Stop Width minimum 1” (25 mm).
Blade Stop clearance, requires 1/2” (13 mm) BLADE STOP SPACER,
1260-61.
Auxiliary Shoe, 1260-62A allows installation of regular arm with
overhead holder/stop. Special templating required.
Delayed Action Add suffix “DEL” to selected cylinder (eg. 1260 DEL).
Delays closing from 100° to 67°, 130° to 70° or 180° to 73° depending on
templating. Delay time adjustable up to approximately 1 minute
.
LL
C
133 mm
5 1
/4
1261PA-18
252 mm
B
A
4
102 mm
16 1/4
4
13 mm
4
1
02 mm
2 7/8
73 mm
9 15/16
114 mm
4 ½
6
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
9/07