Specification Sheet

Options
Delayed action cylinder
.
Hold-open arm.
Slim Line cover. (C)
Special T
emplates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
HINGE (PULL) SIDE
MOUNTING
MAXIMUM OPENING
To 100°
A = 6 9/16” (167 mm)
B = 12 7/16” (316 mm)
or 101° to 120°
A = 5 9/16” (141 mm)
B = 11 7/16” (291 mm)
or *121° to180°
A = 3 1/16” (78 mm)
B = 8 15/16” (227 mm)
Hold-open points up to maximum
opening with hold-open arm.
*Frame and trim permitting.
LCN 1260 SERIES
Butt Hinges should not exceed 5” (127 mm) in width.
Auxiliary Stop is recommended at hold-open point or where a door
cannot swing 180
°.
Reveal should not exceed 3/4” (19 mm) for regular arm or 1/2” (13 mm)
for hold-open arm.
Top Rail less than 2 1/2” (64 mm) requires PLATE, 1260-18.
Clearance of 2 7/8” (73 mm) behind door required for installation.
Delayed Action Add suffix “DEL” to selected cylinder (eg. 1260 DEL).
Delays closing from 100° to 54°, 120° to 57° or 180° to 66° depending on
templating. Delay time adjustable up to approximately 1 minute.
Bull Nose Trim requires SOFFIT SHOE, 1260-65.
1261-18
12
305 mm
2
1
1/16
68 mm
1 1/4
32 mm
3 3/8
86 mm
252 mm
A
2 7/8
73 mm
B
C
L
9 15/16
2 ½
64 mm
MOUNTING DETAILS
4
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE [phone]
FAX [phone]
www.lcn.ingersollrand.com
9/07