Specification Sheet

ManualsBrandsLCN ManualsLCN Door Closer PartsLCN Drop Plate for Door Closers from the 1260 Collection

LCN CLOSERS

121 W. RAILROAD AVE.

P.O. BOX 100

PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400

FAX 800-248-1460

www.lcn.ingersollrand.com

9/07

Standard 1260 series closer shipped with regular arm, a shaft cover

, and

self reaming and tapping screws. See 1260 Series Pages 8-9 for options.

Non-sized (1-5) cylinder is adjustable for interior doors to 4’6” and exterior

doors to 3’6”.

Closer mounts hinge side, top jamb and parallel arm on either right or left

swinging doors.

Mounts to most common commercial footprint (3/4” x 9 1/16”).

Closer meets ADA requirements. See 1260 Series page 10.

Optional Quick Fix™ bracket kit.

Standard or optional custom powder coat finish.

Optional SRI primer for installations in corrosive conditions.

Optional Slim Line cover.

The LCN 1260 Series combines

the best features from the

previous 1070 and 1370 into a

single versatile and economical

cast iron closer, with dual

mounting capability. The 1260 is

adjustable spring sizes 1-5 and

mounts to the most common

commercial footprint. The 1260

also features a complete line of

regular and extra duty arms,

LCN’s peel-n-stick installation

templates, a convenient spring

adjust pointer, and an optional

Quick Fix™ bracket kit.

UL and cUL listed for self-closing

doors without hold-open. Tested and

certified under ANSI Standard

A156.4, grade one.

FEATURES

LCN 1260 SERIES

PLASTIC

METAL

COVER

DESIGNER SER

IES

*ARM FUNCTION

HEAVY DUTY

HOLD-O

PEN

STANDARD

(SINGLE)

REGULA

R (DOUB

LE)

EDA/HEDA

CUSH/HCUSH

SCUSH/SHCUSH

180°

120° 110° 110°

NON

-HANDED

NON

-SIZED

ACCESSIBIL

ITY

CYLINDER

DELAYED ACTION

POWDER COAT

PLATED

FINISH

PARALL

EL ARM

MOUNTING

STOP FACE

HINGE (PULL) SIDE

TOP JAMB (PULL)

TOP JAMB (PUSH)

Available

Not available

Closer available with less than 5.0 lbs. opening force on 36" door.

* Maximum opening/hold-open point with standard template.

CLOSER MOUNTS

*HINGE (PULL) SIDE

TOP JAMB (PUSH SIDE)

PARALLEL ARM (PUSH SIDE)

*HINGE (pull) side mount shown

Summary of content (8 pages)

PAGE 1
The LCN 1260 Series combines CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) the best features from the previous 1070 and 1370 into a single versatile and economical cast iron closer, with dual mounting capability. The 1260 is adjustable spring sizes 1-5 and mounts to the most common commercial footprint.
PAGE 2
MOUNTING DETAILS LCN 1260 SERIES HINGE (PULL) SIDE MOUNTING MAXIMUM OPENING To 100° A = 6 9/16” (167 mm) B = 12 7/16” (316 mm) or 101° to 120° A = 5 9/16” (141 mm) B = 11 7/16” (291 mm) or *121° to180° A = 3 1/16” (78 mm) B = 8 15/16” (227 mm) 2 7/8 73 mm A 12 305 mm B 2 11/16 68 mm 1 1/4 32 mm 2½ 64 mm 3 3/8 86 mm 9 15/16 252 mm Hold-open points up to maximum opening with hold-open arm. CL *Frame and trim permitting. 1261-18 Butt Hinges should not exceed 5” (127 mm) in width.
PAGE 3
TOP JAMB (PUSH SIDE) MOUNTING MAXIMUM OPENING To 100° A = 7 1/16” (179 mm) B = 12 15/16” (329 mm) or 101° to 120° A = 5 9/16” (141 mm) B = 11 7/16” (291 mm) or *121° to 180° A = 3 1/16” (78 mm) B = 8 15/16” (227 mm) 2 7/8 73 mm A 12 305 mm 9 15/16 252 mm 2 5/8 67 mm 1 7/8 48 mm Hold-open points up to maximum opening with hold-open arm. 1 7/8 48 mm CL B 2 11/16 68 mm *Frame and trim permitting. 1261-18 Butt Hinges should not exceed 5” (127 mm) in width.
PAGE 4
MOUNTING DETAILS LCN 1260 SERIES PARALLEL ARM (PUSH SIDE) MOUNTING B Optional mounting requires PA SHOE, 1260-62PA for REGULAR or HOLDOPEN arms. Add prefix "P" to closer description (e.g. P1260). P1260 closer includes 1260-201 FIFTH HOLE SPACER to support PA SHOE.
PAGE 5
1260 EDA MOUNT 1260 EDA or CUSH-N-STOP MOUNTING B 1260 closers ordered with EDA, CUSH or SPRING CUSH arms include 1260-201 FIFTH HOLE SPACER to support the shoe. 4 102 mm 2 7/8 73 mm 5 1/2 140 mm 16 406 mm MAXIMUM OPENING EDA template allows 120°. Hold-open point up to maximum opening.
PAGE 6
ACCESSORIES LCN 1260 SERIES CYLINDERS CYLINDER, 1260-3071 Standard, non-handed cast iron cylinder assembly. 3071 ARMS REGULAR ARM, 1260-3077 Non-handed arm mounts hinge side or top jamb. P1260 closer includes PA SHOE, 1260-62PA required for parallel arm mounting. PA SHOE, 1260-62PA Required for parallel arm mounting. LONG ARM, 1260-3077L Optional, non-handed arm includes LONG ROD AND SHOE, 1260-79LR for top jamb mount with deep reveals.
PAGE 7
COVER ACCESSORIES LCN 1260 SERIES 72 COVER, 1260-72 Optional, non-handed, slim line plastic cover. INSTALLATION ACCESSORIES PLATE, 1260-18 Required for hinge side mount where top rail is less than 2 1/2” (64 mm). Required for top jamb mounting where head frame is less than 1 3/4” (44 mm) or flush ceiling condition exists. Plate requires minimum 1 1/2” (38 mm) minimum top rail or 1 1/4” (32 mm) head frame.
PAGE 8
HOW-TO-ORDER 1260 SERIES CLOSERS ORDERING INFORMATION LCN 1260 SERIES TABLE OF SIZES Select closer based on width of door. The spring power of a 1261 cylinder is field adjustable from size 1 through size 5 and is shipped adjusted to size 3. PA mount adjustable - size 1 to 4. Indicates recommended range of door width for closer size.