Manual

7
Choke Tube System
Your shotgun was provided with three
choke tubes (IC, M, F) to meet varying
shooting and hunting situations.
A unique notching system allows choke
tubes to be easily identified in minimal
light conditions, as shown in the following
chart.
NO. OF SLOTS CHOKE
ON CHOKE TUBE DESIGNATION
I . . . . . . . . . . . . . . . . .Full
II . . . . . . . . . . . . . . . . .Improved Modified
III . . . . . . . . . . . . . . . .Modified
IIII . . . . . . . . . . . . . . . .Improved Cylinder
IIIII . . . . . . . . . . . . . . .Cylinder
Your shotgun barrels are threaded to
accept any chokes with American stan-
dard 32 threads-per-inch threading.
• WARNING: Always open the action and
unload your shotgun before changing
chokes. NEVER fire your shotgun with-
out choke tubes installed. Doing so may
damage the threads and/or barrels.
Always make sure the choke tubes are
firmly screwed into the barrels, but do
not over-tighten. Never use a choke that
is bent or out-of-round.