Manual

4
How to Fire
With the gun pointed at the target, move
the safety to the FIRE position (all the
way forward), aim, and pull the trigger.
The selected barrel will fire. To fire the
second barrel, pull the trigger again. If
you don’t fire both shells, be sure to put
the safety on SAFE until you are ready to
shoot again.
Firing Sequence Selection
The safety switch on the tang of your
shotgun has a dual function. In the center
of the switch is a button that can be
moved to the left or right. The position of
this button determines which barrel will
fire first when the trigger is pulled. When
the button is moved to the right, a single
red dot is revealed (see F). The single dot
means the bottom barrel has been select-
ed to fire first. If the trigger is pulled again,
the top barrel will then fire. If the shooter
wishes the top barrel to fire first, the but-
ton should be moved to the left, revealing
two red dots (see G).
Selective Ejectors
Your shotgun is fitted with automatic ejec-
tors that eject fired shells when the action
is opened. The ejectors will not eject
unfired shells. If two shells are loaded, but
only one has been fired, only the fired
shell will be ejected (see H).
•WARNING: Take care not to point the
rear of the action toward yourself or
another person when opening the action.
The fired shells are ejected with enough
force to cause possible eye injury.
Single dot–bottom barrel fires first.
F
Two dots–top barrel fires first.
G
Selective ejectors
H