Instruction manual

17
Powering on the recorder
After creating the desired connections, perform the following steps to power
on the recorder:
1.
Connect the power cable and
DC power adapter.
2.
Plug the power cable into a power outlet.
3.
Plug the DC adapter into the power jack on the rear panel of the recorder.
The Power LED lights green
and the startup splash screen
displays.
󽞨 The startup splash screen may differ from the example above.
󽞨 Depending on the connection method selected, you may need to
manually select your TVs' display mode to view the picture.
In the course of normal operation, the first On -Screen Display (OSD)
screen displayed is the Main menu.
The first time you power on the
recorder (or after resetting to
factory defaults) the Setup
(First Time) screen displays.