Instruction Manual
JLB55926T/R
WARNING
STRANGULATION HAZARD －
Children have STRANGLED in cords.
Keep this cord out of reach of children (more than 3 feet/1 meter away
from the crib). Never use extension cords with AC adapters. Only use the
AC Adapters provided.
WARNING
Adult assembly required. Keep small parts
away from children when assembling.
Warning Information
＊Keep this instrucon manual for
future reference.
＊For adult use only.
WARNING
· When an AC Adapter is plugged into an electrical outlet, do not the exposed end.
· Test baby monitor before first use, periodically, and when changing locaon of the
baby unit(Camera).
· Do not use monitor near water (Such as bathtub, Sink, etc).
· Keep parent unit away from heat sources (Such as stoves, radiators, etc).
· Make sure there is proper venlaon around baby unit and parent unit.
·T his product is not a toy. Do not allow children to play with it.
· The mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
· The baby monitor should not be considered as a medical device
. While using
the baby monitor, it is strongly recommended to have an adult directly checking
on your baby. Premature babies or children considered at risk must be supervised
by your pediatrician or other medical staff.
THIS PRODUCT CANNOT REPLACE
RESPONSIBLE ADULT SUPERVISION
· Use only the original rechargeable baery provided.
· Do not shot-circuit supply terminals.
· Remove baery when product is stored for long periods of me or when baery
is exhausted.
· Dispose of exhausted baery properly.
· Keep all baeries away from children.
· The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
· Danger of explosion if baery is incorrectly replaced. Replace only with the same
· Baeries (baery pack or baeries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like.
Baery Warning
Precauons
·Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electrics shock.
·The baby monitor works beer in temperature ranging between 0℃ and 40℃(32℉ and 104℉).
·Do not dismantle the appliance. It does not contain any parts that may be used independently.
·Never Expose the baby monitor for long period to sun’s direct rays and never place it next to a source of heat, in a damp or very
dusty room.
·Never push objects of any kind into this product through openings they may touch dangerous voltage points or short-ou
t parts
that could result in a fire or electric shock. Never spill liquid of any kind on the product.
·Do not aempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
·The product should be mounted to a wall or ceiling inly as recommended by the manufacturer.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and (2) This device must accept any interferen
ce received, including interference that
may cause undesired operaon.
FCC Cauon
To assure connued compliance, any changes or modificaons not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment. (Example -use only shielded interface cables when connecng to computer or peripheral devices).
FCC Radiaon Exposure Statement
This equipment complies with FCC RF radiaon exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cenmeters b
etween the radiator and your body.
This transmier must not be co-located or operang in conjuncon with any other antenna or transmier.
The antennas used for this transmier must be installed to provide a separaon distance of at least 20 cm from all persons and must not be co-located or
operang in conjuncon with any other antenna or transmier.
Federal Communicaon Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are de
signed to provide reasonable protecon against harmful
interference in a residenal installaon.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference to radio communicaoons. However, there is
no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by turning the equipment off and on,
the user is encouraged to try to corre
ct the interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separaon between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
JLB7Tech’s baby monitor warranty policy
JLB7Tech will repair or replace (at our opon) your unit free of charge for 12 months from the date of purchase
if the unit is defecve in workmanship or materials. To claim your repair/replacement, the
product must
be returned to JLB7Tech together with a copy of the purchase receipt. In the absence of the purchase receipt,
the warranty will be 12 months from the date of manufacture. This warranty does not apply to normal wear or
damage from misuse, abuse, improper and handling, installaon, accident, unauthorized repair or alteraon.
Please contact our Customer service by Facebook JLB7Tech or via email for details.
Industry Canada Statement
This device complies with Industry Canada licence-exempt RSS standard.
Operaon is subject to the following two condions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitaon est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'ulisateur de l'appareil doit acce
pter tout brouillage radioélectrique subi, même si le brouillage est suscepble d'en compromere le fonconnement.
IC Radiaon Exposure Statement:
This equipment complies with IC RSS-102 radiaon exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Cet équipement est conforme aux CNR-102 d'Industrie Canada. Cet équipement doit êtreinstallé et ulisé avec une distance minimale de 20 cenmètres entre le radiateur et votrecorps. Cet émeeur ne do
it pas être co-localisées ou opérant en conjonc on avec autreantenne ou émeeur. Les antennes ulisées pour cet
émeeur doivent être installés eournir une distance de
INSTRUCTION MANUAL
or equivalent type.
1
Setup and use your digital video baby monitor
Installing Baby Unit
A. Place Baby Unit on a flat surface, such as a desk or shelf or mount the camera on a wall.
1 meter
Never place the baby unit or the cord
within 1 meter of the crib.
PAIR
Connect the small plug of the power adapter to the Baby Unit and the other end to a
suitable electrical outlet. Only use the enclosed adapter (5V DC 1000mA).
The baby unit is turned on and the power LED will be green.
B.
Connecng the power supply for the Parent Unit.
Connect the small plug of the power adapter to the parent unit and the other end to
a electrical outlet. Only use the enclosed adapter (5V DC/1000mA).
Recommend charging me of at least 3 hours before first use.
C.
2
When baery is low, the power on off LED (icon) will flash red and on screen
Notice:
If you use the parent unit for the first time, when you turn on the parent unit, some boot menus
will pop-up on the screen, we try to explain status and function on these menus, please
according to the tips to switch to the monitor system interface. When you are fimaliar with
this monitor, you could switch off these on screen tips in menu.
display baery icon will flash red indicang that the baery needs to be
charged.
Precaution: use of battery for Parent Unit
Only charge the battery when the battery life indicator is low. Constant
recharging of your battery before the low battery indicator light comes on will
decrease the life of your batteries.
POWER
SAVING
SWITCH
CAMERA
SWITCH
CAMERA
TALK
MIC
DC5V
Press to decrease and increase volume.
Menu mode (Press to select menu option)
Menu mode (Press to adjust menu sengs)
Press and hold to talk to baby unit.
Volume down/up
Talk
Left/Right
Select
+
-
TALK
Power on off status LED
Steady Green: Parent Unit is powered on.
Steady Orange: Charging battery.
Flash Red: Battery Low.
Microphone
Power
: Press and hold to switch “On/Off” the unit.
MENU:
Press to open and exit menu options.
Loudspeaker
Power Saving on off status
Steady Green: Power saving mode is activated.
Sound Level indicator
Visual indicator for sound picked up from baby unit. The louder the sound is
from Baby unit, the more LEDs are light on.
Short cut to switch camera view
Press this key to view camera 1, camera 2 and etc. paired
camera.
MENU
POWER
SAVING
SWITCH
CAMERA
SWITCH
CAMERA
TALK
MIC
3
Function of keys and LED indicators
Parent Unit