Owner's manual

Installation Instructions for

Zuri Pendant

980ZURIP

GENERAL PRODUCT INFORMATION:

This product is suitable for damp locations.

This product can be dimmed with a standard incandescent dimmer.

Suspension

1.0

LP764_

Install the Lamp

LAMP

SOCKET

Screw the lamp into the socket.

NOTE: To reduce the risk of a burn or electric shock

during relamping, disconnect the power to the fixture.

Use MAX 120 volt, 75 Watt Type A19

Medium Base Lamp.

PAGE 1
Installation Instructions for 980ZURIP Zuri Pendant LP764_ Suspension GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a standard incandescent dimmer. Install the Lamp 1A SOCKET LAMP NOTE: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture. Use MAX 120 volt, 75 Watt Type A19 Medium Base Lamp. 1 Screw the lamp into the socket. 1 1.
PAGE 2
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 800.323.3226 - 847.626.6300 www.lbllighting.com © 2013 LBL Lighting. All rights reserved. The "LBL Lighting" graphic is a registered trademark of LBL Lighting. LBL Lighting reserves the right to change specifications for product improvements without notification.