Owner manual

CAUTION - RISK OF FIRE

This product requires installation by a qualified

electrician. Before installing be sure to read all

instructions and TURN THE POWER TO THE

ELECTRICAL BOX OFF.

GENERAL PRODUCT INFORMATION:

This product is suitable for damp locations.

Suspension

Use MAX 32 Watt GX24Q-3 Base

Triple Tube Compact Fluorescent Lamp.

Push the lamp base into the socket.

SOCKET

LAMP

Assemble the Fixture

Place the hardware inside the glass shade and install the

three mounting rods by screwing them in completely.

MOUNTING ROD

CAUTION: Due to the fixture’s weight,

assistance will be needed for installation.

MOUNTING ROD

GLASS

SHADE

Installation Instructions for

Rhythm Pendant (Compact Fluorescent)

980RYTHPCF

1.0

LP761_CF

PAGE 1
Installation Instructions for 980RYTHPCF Rhythm Pendant (Compact Fluorescent) LP761_CF 1.0 Suspension GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. CAUTION - RISK OF FIRE This product requires installation by a qualified electrician. Before installing be sure to read all instructions and TURN THE POWER TO THE ELECTRICAL BOX OFF. CAUTION: Due to the fixture’s weight, assistance will be needed for installation.
PAGE 2
Replacing the Lamp 2A GLASS SHADE SOCKET LAMP C AUTION: To reduce the risk of a burn or electric shock during relamping, disconnect the power to the fixture. SAVE THESE INSTRUCTIONS! Use MAX 32 Watt GX24Q-3 Base Triple Tube Compact Fluorescent Lamp. 1 Reach in the glass shade and pull out the old lamp, then push in the new lamp base into the socket. 7400 Linder Ave, Skokie, IL 60077 800.323.3226 - 847.626.6300 www.lbllighting.com © 2013 LBL Lighting. All rights reserved.