User Manual

Use 120 voltMAX 75 Watt

Type A19 Medium Base Lamp.

Installation Instructions for

Pavia

1.0

LF489_2D75

980PAVIASP

GP I :ENERAL RODUCT NFORMATION

This product can mount to either a 4" square electrical box with

round plaster ring or an octagon electrical box.

This product is suitable for damp locations.

Install the Lamp and Glass Shade

SOCKET

CAUTION:To reduce the risk of a burn or electric shock

during relamping, disconnect the power to the fixture.

LAMP

Screw the lamp into the socket.

Suspension

CAUTION - RISK OF FIRE

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

PAGE 1
Installation Instructions for 980PAVIASP Pavia LF489_2D75 Suspension GENERAL PRODUCT INFORMATION: This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box. This product is suitable for damp locations. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors.
PAGE 2
1A 3 3 THUMB SCREW WASHER 2 BRACKET SAVE THESE INSTRUCTIONS! GLASS SHADE 2 Place the glass shade onto the bracket and align the glass shade holes with the bracket holes. 3 Tighten the three thumb screws with washers through the glass shade holes completely into the bracket holes to secure the glass shade in place. NOTE: Do not over tighten the thumb screws. Overtightening may break the glass and result in injury. 4 Refer to the instructions provided with the canopy to install the fixture.