User guide

3
Connecting the Center Power Feed
Connector to the MonoRail
1/16 ALLEN
WRENCH
#6-32 SET SCREW
HOUSING
HOUSING NIPPLE
MONORAIL
3/8-24 SET SCREW
3/16 ALLEN WRENCH
Unscrew the housing from housing nipple.
Loosen the #6-32 set screw on the housing nipple
with the 1/16 Allen wrench.
Push the housing onto the MonoRail. Screw the
housing nipple to housing tight by twisting the
housing nipple clockwise.
Tighten the #6-32 set screw on the housing nipple
with the 1/16 Allen wrench.
Tighten the 3/8-24 set screw on the bottom of the
housing with the 3/16 Allen wrench.
3A
4
5
1
2
3
2
4
5
3