User Manual

2
Install the Transformer
Remove the screws on the side of the transformer dome
cover and lift the cover off of the backplate.
BACKPLATE
Connect the green transformer wire to a suitable ground in
accordance with local electrical codes.
Connect the black transformer wire to the hot power line
wire with a wire nut.
Connect the white transformer wire to the neutral power line
wire with a wire nut.
CAUTION: Disconnect power to the electrical box!
BACKPLATE
Mount the backplate to the electrical box with two #8-32
screws.
Reattach the dome cover to the backplate with the screws.
SCREW
DOME
COVER
#8-32 SCREW
SCREW
1A1A
4
1A1C
5
1A1B
1A1D
3
2
1
2
3
4
6
5
1 1
6
6