User Manual

3
Install the Lamp and Shades
Push the lamp base completely into the socket.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
LAMP
SOCKET
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Use Volt, type T4, G9 base
bi-pin halogen lamp in each socket.
MAX 60120 Watt
1
2A
2B
Gently push the inner glass shade into the center of the
socket assembly base until it is firmly in place.
2
2C
Carefully screw the outer glass shade onto the socket
assembly base until it is firmly in place.
3
SOCKET
ASSEMBLY
BASE
INNER
GLASS
SHADE
SOCKET
ASSEMBLY
BASE
OUTER
GLASS
SHADE
NOTE: To re-lamp, reverse the section 2 instructions.