User guide

3
Replacing the Lamp
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers to replace the lamp.
Unscrew and remove the old lamp.
Screw the new lamp into the socket.
1
GLASS SHADE
SOCKET
3A
2
LAMP
The lamp is rated at 6 watts at 12 volts.
2H
Firmly tighten the set screw on the conical connector.
10
10
Pull the coaxial cable toward the fixture to smooth the
wrinkles.
2I
11
11