Owner's manual

1D
1E1C
2
Feed the fixture wires through the mounting plate post and
into the electrical box.
Pull the fixture and power line wires out of the electrical box.
Place all wires and wire nut connections properly inside the
electrical box.
Slide the fixture canopy completely onto the mounting plate
post. Level the fixture and tighten the set screw.
FIXTURE WIRE
POWER LINE WIRE
POWER LINE WIRE
FIXTURE WIRE
POST
Connect the white wire to the neutral power line wire with a
wire nut.
Connect the black wire to the hot power line wire with a wire
nut.
4
5
5
6
5
8
6
7
7
9
4
9