Instruction Manual

2
CORD
CANOPY
Adjust the fixture height (from bottom of the fixture
shade to top of the canopy) by moving the canopy and
strain relief up or down.
When the desired height is achieved, tighten the set
screw on the strain relief.
Mark the cord underneath the strain relief.
Install the Fixture
2C
SET SCREW
Loosen the set screw on the strain(Do Not Remove)
relief.
2B
2
3
4
5
4
3
Remove the strain relief from the housing by unscrewing
the housing cap and pulling the strain relief out.
2A
1
STRAIN RELIEF
HOUSING CAP
STRAIN RELIEF
HOUSING