Instruction Manual

3
Replacing the Lamp
If necessary, slide the stem up.
Lift the shade up to expose the socket.
Lower the shade onto the socket assembly.
If necessary, slide the stem back down in place.
Unscrew the old lamp.
NOTE: Use only your fingers to replace the lamp.
2C
LAMP
SHADE
SOCKET
Screw the new lamp into the socket.
SHADE
NOTE: To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
The lamp is rated at 6 watts at 12 volts.
2A 2C
2B
2D
1
3
4
5
2
3
4
2
6