Installation & Assembly

3A
3
Feed the fixture wires through the mounting plate
center hole and then pull them out of the electrical box.
Install the strain relief by first feeding the power cord
through it.
Snap the strain relief tab into place.
Pull the cord to take up the slack and fit the rest of the
cord in the strain relief’s openings.
Connect the and the fixture ground wiremounting plate
to a suitable ground in accordance with local electrical
codes.
Connect the fixture wire: white wire, white tracer, or
labeled neutral to the neutral power line wire with a
wire nut.
Connect the last fixture wire: black wire or labeled
positive to the hot power line wire with a wire nut.
Neatly place all wires and wire nut connections in the
electrical box and reinstall the canopy to the mounting
plate (reversal of step 1A).
TAB
2
3
1
4
2
1
3
4
4
Install the Fixture
3B
6
7
5
8
5
6
7
5