Instruction Manual

2
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2012 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
1C
2
Install the shade by sliding onto the socket assembly.
Re-tighten the shade cap to secure the lamp shade.
3
24
Install the Lamps and Diffuser
2A
2
Screw the lamps into the sockets.
1
TOP VIEW
SHADE
FRAME
SOCKET
ASSEMBLY
LAMP
SOCKET
Use
Type A19 Medium Base Lamp.
120 voltMAX 75 Watt
2B
2C
2
Unscrew the diffuser cap from the socket assembly.
2
DIFFUSER CAP
DIFFUSER
Insert the glass diffuser onto the nipple and secure it
against the shade pegs by screwing the diffuser cap
back into place.
23
DIFFUSER CAP
SHADE
PEG
NIPPLE
SOCKET
ASSEMBLY
SHADE
FRAME
SAVETHESE INSTRUCTIONS!
NOTE: To re-lamp, reverse section 2.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.