User Manual

1
Adjust the Suspension Cable
If necessary, adjust the aircraft cable until the fixture is
level; feed the cable into the cable clutch to raise the
fixture and push in on the cable clutch nipple to release
the cable and lower the fixture.
CABLE
CLUTCH
1
5A
6
Screw the anchor in the rest of the way with a Phillips
screwdriver.
Insert the #8 screw into the threaded nipple and washer.
Tighten the #8 screw completely into the anchor to secure the
washer and threaded nipple in place.
ANCHOR
WASHER
#8 SCREW
THREADED NIPPLE
Screw the cable post completely to the threaded nipple.
CABLE POST
THREADED NIPPLE
4C
4D
4E
73
74
5
5
3
4
CAUTION: Make sure to support the fixture while
making adjustments, an assistant will be needed to
complete this step.