User's Manual

16
15
2. System Settings For Indoor Units
2.1 Mouse Control
No menus on the indoor unit can be operated, so users should set up parameters for the indoor
unit via Web browser.
2.1 Device Connect--Through wired network or wireless network(optional)
A. User can connect the indoor device through network cable, operation steps:
1. Connect the crystal head of network cable to RJ45 interface of the indoor unit.
2. Connect outdoor camera(s) to the indoor unit through 4 pin line(s).
3. Connect the power adapter to the electrical outlet of the indoor unit and power on.
4. Wait for a moment until hearing a beep, this time the indoor unit start completely.
Network connection diagram through wired network of Figure 1 as an example of a
non-visual indoor.
Internet
Reset
WAN
LAN
DOOR
AC/DC power
lock
(not Included)
(not Included)
4C
3G/WIFI
IOS/Android
To WAN
To LAN
To LAN
B. The indoor device with WIFI function can also work in WIFI wireless network.
1. If user connects a network cable to the indoor device, the parameters for WIFI can be set up via
IE browser, please see section for more information, network connection
diagram please refer to Figure 1 on the above.
2. If user doesn’t want to connect a wired cable to the indoor unit, and user needs to prepare a
wireless router and a smart-phone or a pad with IOS or Android system. The parameters for WIFI
can be set up via a smart-phone or a pad with IOS or Android system, please see section
for more information.
Network connection diagram via wireless network as Figure 2 as an example of a non-visual
indoor unit.
2.7.3.3 Network--WIFI
2.2 Soft
AP function
DOOR
AC/DC power
lock
(not Included)
(not Included)
4C
WIFI(LAN)
IOS/Android
Reset
WAN
LAN
Internet
To WAN
AP mode
WIFI
(LAN)
WIFI(LAN)
WIFI(LAN)
1
2
3
3G/WIFI
IOS/Android
Indoor Device
Figure 1
Figure 2
2.2 Soft AP Function
Router
Indoor Device
Modem
PC
Modem
Router
PC
The indoor unit can be worked in AP mode. If user doesn’t want to connect a wired cable to the indoor device,
and user need prepare a wireless router and a smart-phone or a pad with IOS or Android system. The network
connection diagram via wireless network please refer to . Figure 2 on section 2.1 Device Connect
1) First user must install a mobile operating system specific program into his mobile or pad. The Android mobile
program is located on the included CD or downloaded via “Play Store”, and the iPhone or iPad program should
be downloaded via “APP Store”. In “Play Store” or “APP Store”, please search for “MobileEyeDoor+” and install
it onto user’s mobile or Pad. Please see the instruction manual for user’s mobile to install the program.
2) Second turn on user’s phone WLAN function, then click the “MobileEyeDoor+” icon to run the program, click
“ ” to select add mode, here must select “ ” to the next interface to add wireless device.
3) Then make the indoor unit into standby mode, and long-press the “talk” button on the front panel, don’t loosen
the button until hearing a beep, this means the device will reboot automatically and go into AP mode. Wait for
a moment, when hearing another beep it means the device starts successfully and goes into AP mode.
4) On “WIFI setting” interface, wait for a moment and phone with android system can be connected to the device
WIFI successfully automatically. For the phone with IOS system user need to connect device WIFI function
manually. Click “ ” to enter WLAN interface of user’s phone to see available networks, and UID
number of the indoor device(the UID is attached to the machine) will be shown on the available networks list.
Select it and connected successfully means the mobile will be connected to the indoor unit directly(shown as
follows).
5) On this interface, Return to the “WIFI setting” interface and go to the next step. available wireless devices will
be shown on the list. Choose one and click it, if the wireless password of the wireless router is enabled, it will
pop-up a window to enter the password of the wireless router, input the correct password and setting ok, the
indoor device will reboot automatically, it will be connected to the wireless router after starting when hearing a
beep again.
7) Return to the WLAN settings on the mobile and choose the wireless router which the indoor unit has been
connected to. Now the wireless function of the indoor device has been activation and works normally(Shown
as follows).
6) Click “Next Step” to add indoor device, input the correct password of the device, default as “888888", and then
save.
2. When the device went into AP mode, long-press the “Talk” button again, don’t loosen the button until
hearing a beep, this means the device will reboot automatically and will return to the previous
connection mode.
For more details of “MobileEyeDoor+”, please refer to Section .3.1 Mobile Phone Software Visit
1. If the device has went into Ap mode, but the wireless function of the device hasn’t been activation via
“MobileEyeDoor+” on the phone or user doesn’t do any operate about the device, after 10 minutes the
device will automatically exit AP mode and returns to the previous connection mode.
Note:
In the following diagram, we use a smart-phone with android system to a non-visual indoor unit.
The usage of an iPhone/iPad with IOS system is similar.
Talk
Unlock
Hang up
UID: zz0280a1cb