User's Manual

41
42
Name: Set name for the indoor unit, and saves settings for future usage.
UID: The device UID (UID is attached to the machine).
User: The user name set for entering the indoor unit system. The default is “Admin”.
Password: The password set for entering the indoor unit system. The default is “888888".
Channel Number: Set the max channels of the device will be connected.
Click “ ” to save.
On LAN, turn on the WIFI of the Wireless Router and the mobile phone. Click “LAN Search”
and online devices will appear on the “Search number of device” list, click one to add the
device, the following fields will need to be completed:
C. Adding by “LAN Search”
Channel Number: Set the max channels of the device will be connected.
Click “ ” to save.
3) After adding the device successfully, the device will appear on the main screen. Click the
device, and all the channels of the device will be shown on the screen. Click any channel and
it will connect immediately. The background of the channel will be highlighted after connecting
successfully(shown as follows).
Name: Set name for the indoor unit, and saves settings for future usage.
User: The user name set for entering the indoor unit system. The default is “Admin”.
Password: The password set for entering the indoor unit system. The default is “888888".
4) The functions of the other icons on the live view:
Unlock.
Snapshot .
: to capture a frame of the video stream as a still photo
Record: Click it to start manual record video on the current channel, and the right top corner
of the channel has a normal recording video symbol “[REC]”. And click it again to stop manual
record.
Click it to turn the sound on or disable.
Click it to start to talk, and the background of the button will be highlighted. Click it again to
stop talking.
Click it to display or hide the buttons “ ”.
Click it to enter the device list interface.
Click it to enter the snapshot file and record file.
Click it to enter the local setting interface.
Click it to enter user guide interface.
5) On the live view, users can touch a channel on the screen and drag it to the other channel
position directly.
6) On the interface of “Devices”, user can edit the parameters of one device, click “ ” to the next
interface as below. Click “ ” to enter edit mode to adjust the parameters. Click “ ” to save.
And click “ ” to remove the information of the current device.
[Alarm Setting]: To access the interface about the parameters of one device, there is an option
“Alarm Setting” for alarm push function. When select “On”, it indicates that the alarm push function
of the current device is enabled. To enable alarm push function, users need to make sure the
indoor unit and the mobile phone are both connected to internet.
Note: 1)When the option “Alarm Setting” on the mobile software interface is
set to “On”, someone press the call button on any outdoor camera, the
notification message will be pushed onto the phone(shown as the right
figure). And users can click the alarm list to access to the video live view
of the channel directly or access to the video live view to unlock for the
outdoor camera.
2) The alarm push function can be effective, and the device must be
added by UID type.
[WIFI Setting]: To access the interface about the parameters of one device,
there is an option “WIFI Setting” for the indoor device. Click “WIFI setting”,
and available wireless devices will be shown on the list. Choose one and
click it, if the wireless password of the wireless router is enabled, it pop-up a
window to enter the password of the wireless router, input the correct
password and setting ok, the indoor device will reboot automatically, it will be connected to the
ipdoor 2014-07-21 10:21:03