User's Manual

2> After adding the device successfully, the device will appear on the main screen. Click the
device, and all the channels of the device will be shown on the screen. Click any channel and
it will connect immediately. The background of the channel will be highlighted after connecting
successfully(shown as follows).
3> The functions of the other icons on the live view:
Unlock.
Snapshot .
: to capture a frame of the video stream as a still photo
Record: Click it to start manual record video on the current channel, and the right top corner
of the channel has a normal recording video symbol “[REC]”. And click it again to stop manual
record.
Click it to turn the sound on or disable.
Click it to start to talk, and the background of the button will be highlighted. Click it again to
stop talking.
Click it to display or hide the buttons “ ”.
Click it to enter the device list interface.
Click it to enter the snapshot file and record file.
Click it to enter the local setting interface.
Click it to enter user guide interface.
4> On the live view, users can touch a channel on the screen and drag it to the other channel
position directly.
5> On the interface of “Device”, user can edit the parameters of one device, click “ ” to the next
interface as below. Click “ ” to enter edit mode to adjust the parameters. Click “ ” to save.
And click “ ” to remove the information of the current device.
[Video Push]: To access the interface about the parameters of one device, there is an option
“video push” for alarm push function. When select “On”, it indicates that the alarm push function of
the current device is enabled. To enable alarm push function, users need to make sure the indoor
37
38
unit and the mobile phone are both connected to internet.
Note:
1) First please make sure alert about the program “MobileEyeDoor+” on iPhone or iPad could be shown in
Notification Center, user can enter into the menu “Settings->Notification Center->Include” to set up “Badge
APP Icon, Sounds, Shown in Notification Center” to be “ON”.
2) When the option “video push” on the mobile software interface is set to “On”, someone press the call button
on any outdoor camera, the notification message will be pushed onto the master’s phone or iPad (Shown as
below figure). And users can click the alarm list to access to the video live view of the channel directly or
access to the video live view to unlock for the outdoor camera .
3) The alarm push function can be effective, and the device must be added by UID type.
[WIFI Setting]: To access the interface about the parameters of one device, there is an option
“WIFI Setting” for the indoor device with WIFI function. Click “WIFI setting”, and available wireless
devices will be shown on the list. Choose one and click it, if the wireless password of the wireless
router is enabled, it will pop-up a window to enter the password of the wireless router, input the
correct password and setting ok, the indoor device will reboot automatically, it will be connected to
the wireless router after starting when hearing a beep again.
Note: If users want to connect the device via wireless network, when the device restarts automatically
after completing set of the parameters about WIFI, please unplug the Ethernet cable connected to the
device, otherwise the device will run via wired network.
6>
Click one on the list to see the picture or the record.
Click “ ” to enter the snapshot and record file interface. Click “Photos” or “Records” to switch
display interface. Click “ ” to enter edit
mode, users can remove the file list that they want to.
ipdo or 2014-07-29 10:21:30