Application Guide

-
6
-
1. Transformer Jaws
Pick up the AC Current flowing through the conductor.
2. Electric torch
Illuminate an area of work when it is on.
3. Alarm indicator
The indicator is lit when the meter is closer the alive wire.
4. Trigger
Press the level to open the transformer jaws when the finger press
on the level is released the jaws will close again.
5. Function/ rotary Switch
This switch can be used to select desired function and range.
6. Back light button
Press the button, backlight is on. Press the botton again backlight
is off.
7. Select button
Press this button to select , or v measuring function when
the function switch is set at corresponding range position.
8. MAX button
Press this button to display the maximum and minimum values in
the current measurement process.
9. Hold button and electric torch
press this button quickly, LCD will show the last reading, and “H”
symbol will appear till pushed again. Data holding will be cancelled
automatically when the function switch is rotated.
Press the button than 2 seconds, flash light is on, press the button
than 2 seconds again. Flash light is turned off.
10. Range button
Press this button to select a range suitable for testing. for example
2/20A position.
11. Display
3 5/6 digital LCD, with a max. reading of 5999.
12. COM Input Jack
Low input for all voltage, resistance, and continuity measurement will
accept banana plugs.
13. Input Connect
High insulation resistance input for all voltage, resistance, and
continuity, etc measurement will accept banana plugs. Such as
frequency duty cycle. The temperature sensor may input here in