Application Guide

-
3
-
magnetic field. The performance of the Meter may
deteriorate after dampened.
 When using the test leads, keep your fingers behind the finger
guards.
 Disconnect circuit power and discharge all high-voltage
capacitors before testing resistance, continuity or diodes.
 Replace the battery as soon as the battery indicator
appears. With a low battery, the Meter might produce false
readings that can lead to electric shock and personal injury.
 Remove the connection between the testing leads and the
circuit being tested, and turn the Meter power off before
opening the Meter case.
 When servicing the Meter, use only the same model number
or identical electrical specifications replacement parts.
 The internal circuit of the Meter shall not be altered at will to
avoid damage of the Meter and any accident.
 Soft cloth and mild detergent should be used to clean the
surface of the Meter when servicing. No abrasive and solvent
should be used to prevent the surface of the Meter from
corrosion, damage and accident.
 The Meter is suitable for indoor use.
 Turn the Meter power off when it is not in use and take out the
battery when not using for a long time. Constantly check the
battery as it may leak when it has been using for some time,
replace the battery as soon as leaking appears. A leaking
battery will damage the Meter.
Series Clamp Meters Function Table
2. GENERAL CHARACTERISTICS
Display : LCD, 6000 counts updates 2/sec
Polarity Indication : “-” displayed automatically
Over-range Indication : “OL” displayed
Low Battery Indication : “ ” displayed