Application Guide

-
2
-
1. INTRODUCTION
This manual provides all safety information, operation instruction,
specifications and maintenance for the meter, which is compact,
handheld, and battery operated.
This instrument performs AC/DC voltage, AC Current, Resistance,
Audible Continuity, Diode and Temperature measurements ect.. It is
a 3 5/6 digits, 6000 counts auto ranging digital clamp multimeter.
It has the functions of polarity indication, data hold, maximum
value hold, over range indication, automatic power-off ,Ielectric
torch,NCV,and rms measure. it can be operated easily and is an
ideal instrument tool.
DT2015 series digital clamp multimeter has been designed
according to EN61010-1 oncoming electronic measuring instruments
with an over voltage category (CAT III 600V) and Pollution degree 2.
Warning
To avoid possible electric shock or personal injury, and to avoid
possible damage to the Meter or to the equipment under test, adhere
to the following rules:
 Before using the Meter inspect the case. Do not use the
Meter if it is damaged or the case (or part of the case) is
removed. Look for cracks or missing plastic. Pay attention
to the insulation around the connectors.
 Inspect the test leads for damaged insulation or exposed
metal. Check the test leads for continuity.
 Do not apply more than the rated voltage, as marked on the
Meter, between the terminals or between any terminal and
grounding.
 The rotary switch should be placed in the right position and no
any changeover of range shall be made during measurement
is conducted to prevent damage of the Meter.
 When the Meter working at an effective voltage over 60V in
DC or 30V rms in AC, special care should be taken for there is
danger of electric shock.
 Use the proper terminals, function, and range for your
measurements.
 Do not use or store the Meter in an environment of high
temperature, humidity, explosive, inflammable and strong