Instruction Manual

1 cast the picture on the wall;
2 If the picture is not clear, please rotate the focus knob;
3 using the stylus to touch;
4 The touch position is not accurate. Please click the
remote control auto calibration button and wait for about
10 seconds.The automatic calibration is successful.
Press and hold the power button for 3 seconds to turn off;
or press the power button for 3 seconds to directly shut
down.。
It can be used with charging, charging time is about 3 hours,
and it is used for about 2 hours after being filled.
The peak power is about 70 minutes.
【Off】
【Charging】
【Wall mode】
1 When auto calibration, please do not stand between the screen and the product;
2 When the automatic correction is performed, the screen size is about 40 inch;
3 Do not perform automatic correction in direct sunlight.
<6>