Touch Pico projector 【Instruction manual】 CATALOG Quick instructions Part name Accessories Notice Instructions for use Usage problem
Quick instructions Important: Please connect to the network before use. 1, three modes ①Desktop mode： Use your finger for desktop touch； ②Wall mode： ③Roof mode Use the stylus to touch: Note: 1 The touch position is not accurate. Please click the remote control auto calibration button and wait for about 10 seconds. The screen can be automatically corrected successfully; 2 Touch failure, please use the remote control to [App Center] - [Touch Adjustment], Then click the remote auto calibration button.
Name of each part DC port Indicator light Focusing Power Reset remote control MIC Null <2>
Accessories Indicator light Setting Involume Power BACK Home correction Remove the battery protection film before use remote control Touch Pen Power Adapter Under the lining of the box <3>
Attention Prohibited Do not tamper with Do not disassemble or repair other than the repair technician. Note: Remodeling this product may cause fire, electric shock,Injured or malfunctioning. The power plug is broken and the plug is inserted into socket.Do not use when loose. Note: It may cause electric shock, short circuit, or fire. Do not plug or unplug the power supply when your hands are wet. Do not look directly at the light source with your eyes.
【Desktop mode】 1 adjust the bracket to make the screen to the desktop; 2 If the picture is not clear, please rotate the focus knob; 3 can perform finger touch operation; 4 If the touch position is not accurate, please click the remote control auto correction button and wait for the appointment.
【Wall mode】 1 cast the picture on the wall; 2 If the picture is not clear, please rotate the focus knob; 3 using the stylus to touch; 4 The touch position is not accurate. Please click the remote control auto calibration button and wait for about 10 seconds.The automatic calibration is successful.
Tips for using questions 1, boot does not start? May be out of power, please use the dedicated power adapter to charge after use, or Used while charging; 2. Does speech recognition not respond? 1 Please connect to the network and click the voice button; 2 turn up the volume; 4.
