Instruction Manual

Page 3 of 5
STEP 4
STEP 3 - WIRING WITH SWITCH
Unscrew the clips and remove the scuttle panel trim.
Mount the relay and connect the live and earth connections.
STEP 5
Run the lamp cables through the scuttle, one to the
left, and one to the right.
STEP 6
Feed the cable across the scuttle panel ensuring the
cable is secured with cable ties and away from any
moving parts.
EARTH CONNECTION
LIVE CONNECTION
RELAY LOCATION
RUN THE SWITCH CABLE THROUGH
THE FACTORY GROMMET
DRILL A 20MM HOLE AND INSTALL
THE SWITCH