Instruction Manual

Page 2 of 5
PRE-INSTALLATION CHECKS
INSTALLATION
Ensure battery is disconnected.
STEP 1
STEP 2
Remove the A pillar trim
screw cover using a plastic
trim tool.
Once the screw
is removed slide
the ‘A’ Pillar trim
downwards.
Once the trim is removed,
it will expose the T30 torx
screw.
Undo the T30 Torx screw.
Trim can now
be removed. ‘A’
Pillar trim needs
to be removed
on both sides of
the vehicle.
STEP 3 - WIRING WITH SPLICE
Mount the relay and connect the live and earth connections.
HIGH BEAM TRIGGER
EARTH CONNECTION
LIVE CONNECTION
RELAY LOCATION