SDS

Section 9: Physical and Chemical Properties
Appearance
Physical state: Liquid (Clear)
Color: Colorless to pale amber
Odor: Not available
Odor Threshold: Not available
pH: 3-4
Boiling Point: 100 °C (212°F)
Vapor Density: >1 (air=1)
Vapor Pressure: <0.013kPa (0.1mmHg) room temperature
Flash Point: >93.3°C (>200°F)
Flammability (solid, gas): Not available
Lower and upper Explosive (flammable) limits: Not available
Auto-ignition temperature: Not available
Solubility: Easily soluble in the following materials: water
Viscosity: 200cP
Relative Density 1.04
Evaporation Rate: >1 (Butyl acetate=1)
Section 10: Stability and Reactivity
Reactivity: No specific test data related to reactivity available for this product or its ingredients.
Chemical Stability: Product is stable.
Possibility of hazardous reactions: Under normal conditions of storage and use, hazardous reactions
will not occur.
Conditions to avoid: No specific data.
Incompatible materials: Reactive or incompatible with the following materials: oxidizing materials. This
material may be extremely hazardous in contact with chlorates and nitrates. Contact with hypo-
chlorites (e.g. Chlorine bleach) sulfides or cyanides will liberate toxic gases. Contact with alkaline
materials (e.g. Aqua ammonia) will generate heat. High concentrations of this material will react
vigorously with carbonate scales which may carry vapor and so care must be taken to avoid
inhalation.
Hazardous decomposition products: Under normal conditions of storage and use, hazardous
decomposition products should not be produced.